ADIC 601356 instruction

	Step 2.		Output returned:

			Move of media was unsuccessful
			Error VOL107: invalid target archive

Notes	Movement of media is between libraries, not within libraries.
	Media that is allocated to a Move request is not available for
	other allocation until the move completes.
	•	If the -woption is not specified, status from the Move
		request indicates only the initial validity of the move. Actual
		completion of the move can only be traced via callback
		processing, media querying, or operator monitoring.
	The Move command does trigger unsolicited status messages
	from VolServ.
	• If the -woption is specified on a Move request, the client
		can increase the timeout value or the retries value so the CLI
		vsmove command does not time-out while awaiting
		completion of the Move request.
	A pending Mount request is cancelled with the VolServ cancel
	command. The VolServ cancel command is run from the
	command line by sending a SIGQUIT signal (control-\). The
	request also is aborted by sending the SIGINT signal
	(control-c).
See Also	•	vscleareject

2-120

Command Reference

601356 Rev A

ADIC 601356 manual Movement of media is between libraries, not within libraries