ADIC 601356 manual Specifies the destination MediaClass group

	Command Reference
Parameter	Description
-Hhostname	Host name of the VolServ server. The default
	host name is the host name of the computer
	where the CLI command is run.
-nnewmediaclass	Specifies the destination MediaClass group
	for the reclassification of the media selected to
	satisfy the Mount request.
	NOTE: Use this only if the selected media is to
	be reclassified to a different MediaClass
	group.
-pdrivepool	Specifies the name of a drive pool.
	• Valid drive pool names may contain up to
	16 alphanumeric characters, including
	spaces.
	• Leading and trailing spaces are not
	permitted.
-Ppriority	The execution priority of the entered
Default value is	command. Assignable priority values are
	restricted to a range from 1 (highest) to 32
15.
	(lowest) inclusive.
-Rretries	Number of retries the CLI software attempts if
Default value is	a time-out is returned by the API software.
3.
-Ttimeout	Amount of time (in seconds) the API software
Default value is	waits for status from VolServ before returning
	a time-out to the CLI software. Total wait time
120 seconds.
	for a command is (retries plus 1) multiplied by
	time-out value.
-Vprognum	RPC program number for VolServ.
Default value is
300016.

Commands

601356 Rev A Command Reference 2-105