ADIC 601356 manual Client must know the request identifier to be queried

	Command Reference
Notes	The client must know the request identifier to be queried.
	After execution of a request completes, a relatively short period
	of time exists where the request shows a state of “complete.”
	Afterwards, all knowledge of the request is removed from the
	VolServ system and any subsequent queries for the command
	fail.
	The vsrequestqry command returns information for only
	one request per execution.
	The vsrequestqry command does not trigger unsolicited
	status messages from VolServ.
	A pending vsrequestqry is cancelled with the VolServ
	cancel command. The VolServ cancel command is run from the
	command line by sending a SIGQUIT signal (control-\). The
	request also is aborted by sending the SIGINT signal
	(control-c).
See Also	None

Commands

601356 Rev A Command Reference 2-147