KitchenAid KEBU107SSS Make Electrical Connection, Electrical Connection Options Chart

3.Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Lift and pull oven door toward you and remove. Set the oven door(s) aside on a covered work surface.

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death, fire, or electrical shock.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together.

1.Disconnect power.

2.Feed the flexible conduit from the oven through the opening in the cabinet.

3.Remove junction box cover, if it is present.

4.Install a UL listed or CSA approved conduit connector to the junction box.

A

A. UL listed or CSA approved conduit connector

5.Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector.

6.Tighten screws on conduit connector.

7.See “Electrical Connection Options Chart” to complete installation for your type of electrical connection.

Electrical Connection Options Chart

If your home has:	Go to section:
4-wire	4-wire Cable from Home
	Power Supply
	½"
	(1.3 cm)
3-wire	3-wire Cable from Home
	Power Supply

½"

(1.3 cm)

4-Wire Cable from Home Power Supply

IMPORTANT: Use the 4-wire cable from home power supply in the U.S. where local codes do not allow grounding through neutral, New Branch circuit installations (1996 NEC), mobile homes and recreational vehicles, new construction and in Canada.

A

B

	E
	F
	G
C	H
D	I
A. Cable from home power supply	F. White wires
B. Black wires	G. UL listed wire connectors
C. Red wires	H. Green (or bare) ground wires
D. 4-wire flexible conduit from	I. UL listed or CSA approved
oven	conduit connector
E. Junction box

1.Connect the 2 black wires (B) together using a UL listed wire connector.

2.Connect the 2 red wires (C) together using a UL listed wire connector.

3.Untwist white wire from green (or bare) ground wire coming from the oven.

4.Connect the 2 white wires (F) together using a UL listed wire connector.

5.Connect the green (or bare) ground wire (H) from the oven cable to the green (or bare) ground wire (in the junction box) using a UL listed wire connector.

6.Install junction box cover.

6