ADIC 601356 manual Indicates VolServ waits until the command

Command Reference

Parameter	Description
-w	Indicates VolServ waits until the command
	processing completes before returning status
	to the client.
	If the move requires an inter-library move,
	VolServ waits until the move completes,
	whether the source and destination libraries
	are attended or unattended. When the
	• If -woption is not specified, final status is
	returned as soon as move processing
	begins.
-v	Indicates that verbose output is needed.
	Status is returned on every media specified in
	the vscheckout command.
	NOTE: If -vis not specified, status is returned
	on only those media that were not
	successfully checked out.
-I	Command options are first read from the
	command line. VolServ then reads any
	options contained in the stdin file.
-h	Requests help for the entered command.
	When the Help option is specified, no
	command line processing is performed.
	An exit code of 0 is returned to the client when
	the Help option is specified.
-Hhostname	Host name of the VolServ server.
	The default host name is the host name of the
	computer where the CLI command is run.
-Ppriority	The execution priority of the entered
Default value is	command. Assignable priority values are
	restricted to a range from 1 (highest) to 32
15.
	(lowest) inclusive.

2-116 Command Reference 601356 Rev A