Enterasys Networks CSX6000, CSX5500, CSX7000 manual Time since the last update was received

USER’S GUIDE

P

The propagation flag, where

A= Always propagate N = Do not propagate

H = Propagate when Next Hop Device Connected

1/2

RIP Version 1/Version 2 visibility flags determine whether or not this route is visible when send the route using RIP 1 or RIP 2, where

0 = Invisible

1= Visible

T

The type of route, where

A = Active Route, learned via RIP on a LAN interface

P = Permanent Route, learned via RIP on a WAN interface

S = Static Route, learned via IP Routing Table

H = Host Route, created when an IP Host Device is connected

Age

The time since the last update was received.

ip rip send

Used to send the IP RIP update messages to a particular interface on demand. Example:

[System Name]> ip rip send 2.2.2.2

Sending IP RIP Update Message to Network 2.0.0.0

ip rip stats

Displays global RIP statistics and also statistics for each configured RIP interface. Refer to RIP Statistics, for a list of available statistics and their definitions.

ip route

Displays the current routing table. Each displayed field for a route entry is as follows:

Destination

IP address for the destination network or host.

Subnet-Mask

Subnet mask value for the destination network or host. A value of 255.255.255.255 indicates that this entry is for a specific IP host.

Next Hop

IP address or device name for the next hop router that provides access to the destination network or the host.

Metric

Hop count to the destination network or the host.

604 CyberSWITCH