Enterasys Networks CSX5500, CSX6000, CSX7000 manual Performing a File Transfer Using Carbon Copy

REMOTE MANAGEMENT

Carbon Copy

The system will prompt you for a password. The default password set on each CyberSWITCH is “CC”. We recommend that you change this password on each CyberSWITCH using the CCINSTAL program.

7.Type: cc<return>

(or <your password><return> if the password has been changed)

If connection with the CyberSWITCH is successful, then the system will remove the Carbon Copy screen. An active administration session now exists with the CyberSWITCH.

If connection with the CyberSWITCH is not successful, then the system will return an error message in approximately 60 seconds. Check the cable connections, phone number, and password. If the connection with the CyberSWITCH is still unsuccessful, report the problem by using the procedures defined in Getting Assistance.

TERMINATING A REMOTE ADMINISTRATION SESSION

This section tells you how to terminate a remote administration session from the administration console PC. You may need this information if you want to make changes to an CyberSWITCH, and then use the same administration console PC to access a different CyberSWITCH.

1.Return to the Carbon Copy command screen. Press: <ALT><RIGHT SHIFT> (at the same time)

This will return the user to the Carbon Copy main screen. In the lower right hand corner, the following commands will be displayed. This command menu is function-key driven.

[F1]	Terminate	Link
[F3]	Capture Screen/Session
[F4]	Review/Replay Captured Image
[F5]	File Transfer Package
[F6]	Printer/LOG/DOS Control
[F8]	Data Link	Maintenance
[F9]	Repaint Screen & Return
[F10]	Return to	Application

2.Choose “Terminate Link” from the Carbon Copy command menu. Press: <F1>

3.Carbon Copy will ask if you really want to terminate the link. To answer yes, press: <return>

4.Choose “Return to Application” from the Carbon Copy command menu. Press: Press: <F10>

Performing a File Transfer Using CARBON COPY

After a successful Carbon Copy logon, the lower right hand corner may contain the Carbon Copy menu. If the menu is not present, display it by pressing the <ALT> and <RIGHT SHIFT> keys simultaneously.

Central Site Remote Access Switch 573