Manuals / Enterasys Networks / Computer Equipment / Network Router

Enterasys Networks CSX7000, CSX5500, CSX6000 manual CSM AS a Call Control Manager

Models: CSX7000 CSX6000 CSX5500

1 729

Download 729 pages 41.51 Kb

Page 383

CONFIGURING CALL CONTROL

CSM as a Call Control Manager

CSM AS A CALL CONTROL MANAGER

This feature allows you to use the CSM for call control management only. This feature allows you to continue to use other authentication servers (e.g., RADIUS, ACE) yet still gain the benefits of CSM call control management.

CONFIGURING CSM FOR CALL CONTROL

USING CFGEDIT

1.Select CSM as Call Control Manager from the Call Control Options menu.

2.The current status of the CSM Call Control Server will be displayed. Select 1 to toggle between enabled and disabled, and ensure an enabled setting.

3.Select TCP port number if you wish to change this setting. Changes here will also appear on the CSM Authentication menu.

4.Return to the Main Menu.

5.For authentication, if you are using the On-node Device Table or Off-node Device Level Security, you are finished with the configuration of this feature. If you are using User Level Security, you may wish to adjust the Authentication Time-out and/or change the Call Control Failure banner. Continue with the following steps.

6.Select Security and then Network Login Information.

7.Select Network Login General Configuration.

8.Select Authentication Timeout. Follow on-screen instructions to adjust this value.

9.Return to the Network Login Information Menu and select Network Login Banners.

10.Select the Call Control Failure Banner. Follow on-screen instructions to adjust this banner.

Note: If you are using CSM as your authentication manager, you do not have to configure the call control option separately. This is only necessary when you are configuring another device for authentication, and wish to use CSM for call control only.

CONFIGURATION ELEMENTS

STATUS

Allows you to enable or disable CSM for call control management.

TCP PORT NUMBER

The TCP port number used by CSM. Note that you can assign a user-defined port number, but that the CSM TCP port number must be entered identically on both the CyberSWITCH and CSM.

Central Site Remote Access Switch 383

Image 383

Enterasys Networks CSX7000, CSX5500, CSX6000 CSM AS a Call Control Manager, Configuring CSM for Call Control Using Cfgedit

Contents

USER’S Guide Virus Disclaimer Trademarks DOC Notice Contents Software Overview Hardware Installation Cfgedit Configuration ToolsSecurity Overview Configuring System Options and Information Configuring Off-node Server Information Configuring Encryption Configuring Advanced Bridging Configuring IPX Central Site Remote Access Switch Configuring Snmp Configuring Other Advanced Options Verifying the Base System Verifying Routing Protocols LCD Messages System Commands System Statistics Routine Maintenance Cfgedit Map Using this Guide Cfgedit MAP Documentation SETCfgedit Screens Guide ConventionsUser’s Guide System Overview CyberSWITCHCyberswitch Hours of Usage Unique System FeaturesUSER’S Guide Central Site Remote Access Switch Interoperability Protocols Interoperability OverviewRadius Interoperability Devices Link Layer Encryption OverviewNetwork Layer Network Interface Overview Security OverviewSystem Components IsdnRemote Isdn Devices Switches Supported Platform Number Main Speed Slots Hardware OverviewSystem Platforms CSX5500 System Platforms EMI To reduce the risk of electrical shock or energy hazards CSX6000 Cleaning the CSX6000 AIR Filter To reduce the risk of electrical shock or energy hazards CSX7000 Disk Drives Number of 1/3 height IDE disk drives supported Front View NE 2000-II a Network Express PlatformPlatform Characteristics NE 4000 a Network Express Platform USER’S Guide NE 5000 Platform a Network Express Platform Cleaning the NE 5000 AIR Filter EMI Mtbf Hardware CharacteristicsSystem Adapters Ethernet AdaptersBasic Rate Adapters 75000hrs PRI-23 Primary Rate AdaptersPRI-8 Jumper Usage PRI-23/30Expander Adapter PRI-8, PRI-23, and PRI-23/30 ConnectionAdapter 35 Pin Receive Data No Connect Data Set Ready No Connect Gnd Signal ReturnNo Connect Ring Indicator Transmit ClockWith data compression With error controlWith error control and data compression Digital ModemsDM-24 DM-8LSI Logic LR33000RISC MvipEncryption Adapter System Software Administration SoftwareSoftware Overview OverviewSystem Files Configuration FilesOperational Files User Level Security Files Accessing the CyberSWITCH System InstallationOrdering BRI Isdn Lines Using Provisioning Settings Ordering Isdn Service US onlyOrdering NI-1 Lines Using EZ-ISDN Codes Ordering NI-1 Lines Using NI-1 Isdn Ordering CodesNI-1 AT&T Custom Point-to-Point Provisioning Settings for AT&T 5ESS SwitchesCSD limit CSD NB limit AT&T 5ESS NI-1 ServiceUnrestricted CSV limit CSV NB limitCSD limit Provision Settings for Northern Telecom DMS-100 SwitchesCSV limit AnyPVC Basic Information for Ordering PRI Isdn Lines Number of call AppearancesVersion Functional Yes US Only Sprint Type of SwitchDisabled Option Local Bell Operating CompanyVerify system power requirements Hardware InstallationPRE-INSTALLATION Requirements Choose a suitable setup locationIf you are installing WAN adapters and DM adapters Verify administration console requirementsProvide a diskette for configuration backup If you are installing only WAN adaptersIf you are installing WAN adapters and an Encryption adapter Adapter SettingsConfigured Slot Interrupt Jumper Address Switch Setting SW1 Adapter Interrupt and I/O Address SettingsDM-24 Adapter Interrupt and I/O Address Settings SW3 SW2OFF Encryption Adapter SettingsMvip Settings DES/RSA AdapterTop Left Top Pair Right Pair Additional Adapter SettingsLine Type Settings J10 J11 J12 J13 J14 PRI-23 Clock SettingsJumper Jumper Setting North American JP9 Mvip JP1JP3 JP6Inserting the Adapters Into the Cyberswitch Connecting Multiple Adapters Connecting Adapter INTER-BOARD CablesFlat Bus Ribbon Cable Connecting a WAN Adapter to the LCD Summary of Guidelines Direct Connection Accessing the CyberswitchMaking Connections NULL-MODEM Connection to a PC DCD DTR DSR RCV Xmit GND RTS CTSRemote Connection Using Telnet COM1 On the CyberSWITCH sideOn the remote administration console side Remote Connections Modem to ModemFrom Cfgedit Options, select Default Async Protocol Establishing AN Administration Session Accessing the Release Notes Upgrading System Software Installing SoftwareCouldn’t open the file C\SYSTEM\PLATFORM.NEI Upgrading System Software Local UpgradeRemote Upgrade Accessing the Release Notes Configuring Basic Bridging Basic ConfigurationCfgedit Configuration ToolsExecuting Dynamic Management Dynamic ManagementExecuting Cfgedit Saving Cfgedit ChangesSaving Dynamic Management Changes Utility Dynamic Management CommandsUsing the Configuration Chapters Using the Network WorksheetsResources Configuring Resources and LinesConfiguring Resources Using Cfgedit Resource Configuration Elements Resource Background Information PPP Lines Configuring Lines Using CfgeditCommonChannel Characteristic PRI/T1 lines E1 lineMultiframe CRC Select Change from the Data Lines menu of Physical Resources Auto TEI Line Configuration ElementsDMS100 custom NI-1 Switch Type Number of Data Number of SPIDsDirectory Numbers Directory Numbers Line Encoding Line Background Information Commport InformationSubaddresses Background Information Configuring a Subaddress Using CfgeditSubaddress Configuration Elements SubaddressesMAC Layer Bridging Configuration Elements Configuring Basic BridgingENABLING/DISABLING Bridging Using Cfgedit Select Enable/Disable BridgingMAC Layer Bridging Background Information Internet Protocol IP Option Configuring Basic IP RoutingEnabling IP Using Cfgedit IP Background Information IP Operating ModeIP Option Configuration Elements Configuring the IP Operating Mode Using CfgeditIP Operating Mode Background Information IP Operating Mode Configuration ElementsIP Network Interfaces Configuring Interfaces Using CfgeditUSER’S Guide Network Interface Configuration Elements MTU Transmit Broadcast IP Address Default switch for numbered WAN interfaces IP RIP Receive Control IP Network Interface Background Information Hdlc Bridge IP Network Interface Type Associated Remote DeviceIP Host RFC1294 WAN Direct Host IP Host RFC1294USER’S Guide Example 1 LAN, WAN and WAN Direct Host Interfaces Example 2 LAN, WAN UnNumbered, WAN Remote LAN Interfaces IP RIP and the IP Network Interfaces Isdn Isdn IP RIP Over Dedicated Connections Isdn Proxy ARP Redundant Configurations for BackupNetwork Flattening Example IP Host Communications in Flattened Networks Secondary IP AddressingStatic Routes Configuring Static RoutesIP address for the destination network or host Static Route Configuration Elements Central Site Remote Access Switch Static Route Background Information IsdnDefault Route Configuration Elements Default RoutesConfiguring Default Routes Routing Information Protocol RIP Option ENABLING/DISABLING IP RIP Using CfgeditLAN IP RIP Configuration ElementsIP RIP Status IP RIP Background InformationSecurity and Encryption Options Configuring Security LevelSecurity Level Security OverviewDevice Level Databases System Options and InformationOFF-NODE Server Information Network Login InformationUser Level Databases Configuring Security Level On-Node Yes Database Device Level User Level Administration SecurityNo Security Configuring no Security Using CfgeditDevice Level Security Background Information Configuring Device Level Security Using CfgeditDevice Level Security User Level Security Background Information Configuring User Level Security Using CfgeditUser Level Security User Level Security Isdn Making a Telnet Connection Responding to Login PromptsACE Configuring Device and User Level Security Using CfgeditDevice and User Level Security TacacsDevice and User Level Background Information System Options Configuring System Options and InformationConfiguring System Options Using Cfgedit System Options System Options Configuration ElementsPAP Chap Bridge MAC Calling Line Id Authentication AddressPAP Chap System Options Background InformationOptional Calling Line Id Configuring System Information Using CfgeditSystem Information Configuration Elements System InformationSystem Information Background Information Administrative SessionConfiguring Administrative Sessions Using Cfgedit Administrative Session Configuration Elements Administrative Session Background Information Emergency Telnet Server Port Number Background Information ON-NODE Device Database Configuring Device Level DatabasesConfiguring AN ON-NODE Device Database ON-NODE Device Entries Configuring ON-NODE Device EntriesOn-node Device Entries No pvc configured for Device DAN SVC None 0.0 IP SubNetwork number ON-NODE Device Database Configuration Elements Base Data Rate Frame Relay Access Configuration Elements Chap Secret Outbound Authentication RIP/SAP Appletalk Information Configuration Elements Bridge Information Configuration Elements Bridging with Hdlc Bridge Devices ON-NODE Device Database Background InformationLine Id Security Mode On-node Device Table Configuration DataIP Routing with Hdlc Bridge Devices PAP or Chap IP Routing with PPP IP Devices Using IpcpIP Routing with IP Host Devices RFC1294 IP Routing with PPP Bridge Devices Using BCP Bridging with PPP Bridge Devices Using BCPPAP Password or OFF-NODE Device Database Location Configuring OFF-NODE Device Database Location Using CfgeditOFF-NODE Device Database Location Background Information OFF-NODE Device Database Location Configuration ElementsConfiguring Authentication Database Location Using Cfgedit Configuring User Level DatabasesUser Level Authentication Database Location Database Telnet Port Number Type communications server Configuring OFF-NODE Server InformationMultiple Administration Login Names Name John Doe Name mynode1 Address Remote Office1Configuring CSM Authentication Server CSM Authentication ServerConfiguring a Radius Authentication Server CSM Authentication Server Configuration ElementsCSM Authentication Server Background Information Is SHAREDSECRET1234 Radius Authentication Server Background Information Radius Authentication Server Configuration ElementsSelect 5 Off-node Server Information Configuring a Radius Accounting ServerReturn to the Off-node Server Information Menu Radius Accounting Server Background Information Radius Accounting Server Configuration ElementsRadius RFC2138 Enabling Radius Type Using CfgeditRadius Type Radius Type Configuration ElementsConfiguring the Dynamic Device Option Using Cfgedit Dynamic Device OptionDynamic Device Configuration Elements Configuring a Tacacs Authentication Server Tacacs Authentication ServerTacacs Authentication Server Background Information Tacacs Authentication Server Configuration ElementsConfiguring AN ACE Authentication Server ACE Authentication ServerACE Authentication Server Configuration Elements ACE Authentication Server Background Information Configuring General Network Login Information Using Cfgedit Configuring Network Login InformationNetwork Login General Configuration Select the type of authentication desired Configuring Network Login Banners Using Cfgedit Network Login BannersNetwork Login General Configuration Background Information Configuring Radius Server Login Information Using Cfgedit Login Configuration Specific to Radius ServerNetwork Login Banners Background Information Login Configuration Specific to Radius Server Configuring Tacacs Server Login Information Using Cfgedit Login Configuration Specific to Tacacs ServerLogin Configuration Specific to Tacacs Server USER’S Guide Select Add a Resource Configuring EncryptionConfiguration Configuring AN Encryption Adapter Using CfgeditSelect Add. Respond to the following series of questions Select IP Security AssociationsSelect Device Level Databases Select On-node device entries Configuring Link Layer Encryption PPP Encryption onlyEncryption Configuration Elements Final Destination IP Address IP Network Layer Encryption Encryption Background Information8888CCCC 12345678 12345678 8888CCCCIsdn Link Layer EncryptionInteraction with Other Features For Link Layer encryption For IP Layer encryptionConfiguring Alternate Accesses Advanced ConfigurationConfiguring a Dedicated Access Using Cfgedit Configuring Alternate AccessesDedicated Accesses Dedicated Access Background Information Dedicated Access Configuration ElementsConfiguring AN X.25 Access AccessesAccesses USER’S Guide Configuration Elements Lapb Configuration Elements Timers Maximum Window Size Nonstandard Default Transmit Window Size PVC Configuration Elements Access Background Information B1 B2 Select Access Information Frame Relay AccessesConfiguring a Frame Relay Access Select Add a PVC Frame Relay General Configuration Elements Dlci Value Frame Relay PVC Configuration ElementsLMI LMI FormatPVC Name Frame Relay Access Background Information Local Management Interface Overview Allowed Not Allowed Bridge Dial OUT Configuring Advanced BridgingUnder ISDN, select Dial Out Phone Number Spanning Tree Protocol Configuring Spanning Tree Protocol Using CfgeditSpanning Tree Protocol Background Information Spanning Tree Protocol Configuration ElementsBridge Mode of Operation Background Information Bridge Mode of OperationConfiguring the Bridge Mode of Operation Using Cfgedit Bridge Mode of Operation Configuration ElementsBridge Filters Configuring Bridge Filters Using CfgeditSource MAC Filter Commands Protocol Definition CommandsPacket Data Filter Commands Destination MAC Filter CommandsProtocol Filter Commands Lsap in HEX Bridge Filter Configuration ElementsFilter Destination MAC Bridge Filters Background InformationFilter Type Maximum Number of Each Source Discard Connect Destination Protocol Packet Unrestricted Mode Bridge FiltersCentral Site Remote Access Switch Sites connected over the WAN according to Filter Action Distribution Result ListPacket matching this filter will not be forwarded On any LAN port. The packet will be sent to remoteOn LAN port 2. The packet will be sent to remote On LAN port 1. The packet will be sent to remoteSites connected over the WAN and to LAN port According to the normal learning bridge methodsRestricted Mode Forwarding Action Restricted Mode Bridge FiltersCentral Site Remote Access Switch Any remote sites connected over the WAN Filter Distribution Result Action ListPacket matching this filter will only be forward Ed on the LAN ports. The packet will not be sent toEd on LAN port 2. The packet will not be sent to re Ed on LAN port 1. The packet will not be sent to reMote sites connected over the WAN or to LAN PortRemote sites connected on the WAN. The packet Packet matching this filter will be discarded onLAN ports. The packet will be sent to all Packet matching this filter will be discarded toPreliminaries Configuring a Destination MAC Address FilterDiscard Connect Known Connect List Configuring the Known Connect ListKnown Connect List Background Information Known Connect List Configuration ElementsStatic ARP Table Entries Configuring Advanced IP RoutingSelect Static ARP Table Entries from the IP menu Configuring Static ARP Table Entries Using CfgeditStatic ARP Table Entries Configuration Elements Static ARP Table EntriesStatic Route Lookup VIA Radius Isolated ModeIP Address Pool Static Route VIA Radius Configuration ElementsConfiguring AN IP Address Pool Using Cfgedit IP Address Pool Configuration ElementsIP Address Pool Background Information IP FiltersConfiguring Packet Types Using Cfgedit Initiating the IP Filter Configuration Using CfgeditTCP UDP Icpm Specify a control value any, established, or not established Select Icmp Type Select Add a Forwarding Filter Configuring Forwarding FiltersConfiguring Connection Filters Configuring Exception Filter Select Apply Global Forwarding Filter Applying FiltersSelect IP Interfaces TCP and UDP Ports IP Filters Configuration ElementsIP Filters Background Information NEQRange Forwarding Filters Packet TypesException Filters Connection FiltersApplication to Network Interfaces Limitations Common PortionFTP WWW Sfvra Example of AN IP Filter ConfigurationForward Dhcp Relay Agent Configuring a Dhcp Relay Agent Using CfgeditDhcp Background Information Dhcp Configuration ElementsRouter to Bridge Environment Bridge to Bridge EnvironmentIP Router to IP Router with Relay Agents on both USER’S Guide Remote Bridge to IP Router w/Relay Agent = WAN Rlan Select Dhcp Proxy Client Configuring the Dhcp Proxy ClientDhcp Proxy Client Dhcp Proxy Client ENABLE/DISABLE Flag Sample Configuration IP Router with Dhcp Proxy Client Security Associations Configuration for IP Router ChloeConfiguring Security Associations Using Cfgedit Configuring DNS and Netbios Addresses Using Cfgedit DNS and Netbios AddressesDNS/NBNS Background Information DNS/NBNS Configuration ElementsConfiguring IPX Configuring IPX Information IPX Routing Option ENABLING/DISABLING IPX Using CfgeditIPX Option Configuration Element IPX Option Background Information Configuring the IPX Internal Network Number Using CfgeditIPX Internal Network Number Configuration Element IPX Internal Network NumberIPX Network Number Background Information Configuring IPX Network Interfaces Using CfgeditIPX Network Interfaces Displays the current IPX network interface data IPX Network Interface Configuration Elements SAP IPX Network Interface Configuration Elements IPX Network Interface Background Information IPX Routing Protocols Configuring IPX Routing Protocols Using CfgeditIPX Routing Protocol Configuration Elements SAP IPX Routing Protocol Background InformationSpecial Considerations Remote LAN Interface IPX Static Routes Configuring IPX Static Routes Using CfgeditIPX Static Routes Background Information IPX Static Routes Configuration ElementsConfiguring IPX Netware Static Services Using Cfgedit IPX Netware Static ServicesIPX Netware Static Services Configuration Elements IPX Spoofing IPX Netware Static Services Background InformationConfiguring IPX Spoofing Using Cfgedit IPX Spoofing Background Information IPX Spoofing Configuration ElementsWatchdog Protocol IPX Type 20 Packet Handling Configuring IPX Type 20 Packet Handling Using CfgeditIPX Type 20 Packet Handling Configuration Elements IPX Isolated Mode Background Information IPX Isolated ModeConfiguring IPX Isolated Mode Using Cfgedit IPX Isolated Mode Configuration ElementsDisplaying WAN Peer List Configuring Triggered RIP/SAP Global Timers Using CfgeditTriggered RIP/SAP Background Information IPX-SPECIFIC Information for Devices Configuring IPX DevicesIPX-Specific Information for Devices Remote LAN Devices IPX Configuration Elements for Devices Enable Bridging and disable Make calls for bridge dataNone IPX Background Information for Devices Configuring Snmp Configuring SnmpConfiguring Snmp Snmp Configuration Elements Snmp Background Information WAN Central Site Remote Access Switch CT-CONTAINER-MIB CT-WAN-MIB CTMIB2-EXT-MIB Using Cabletron NMS SystemsAppletalk Routing Option Configuring Appletalk RoutingEnabling Appletalk Routing Using Cfgedit Appletalk Routing Background Information Appletalk Routing Option Configuration ElementConfiguring Appletalk Ports Using Cfgedit Appletalk PortsAppletalk Ports Configuration Elements Appletalk Ports Background Information Overview Considerations ConfigurationConfiguring Appletalk Static Routes Using Cfgedit Appletalk Static RoutesAppletalk Capacities Appletalk Routing Static Routes Configuration ElementsConfiguring Appletalk Capacities Using Cfgedit Appletalk Capacities Configuration ElementsAppletalk Capacities Background Information Appletalk Isolated ModeConfiguring the Appletalk Isolated Mode Using Cfgedit Appletalk Isolated Mode Configuration ElementsCall Control Menu Configuring Call ControlThroughput Monitor Configuring the Throughput MonitorThroughput Monitor Background Information Throughput Monitor Configuration Elements90% Condition Trigger Number Window Size UtilizationUnderload Condition Monitoring USER’S Guide Monthly Call Charge Call Interval ParametersMonthly Call Charge Background Information Monthly Call Charge Configuration ElementsConfiguring Call Restrictions Using Cfgedit Call RestrictionsCall Restriction Configuration Elements Maximum Calls PER DAY Maximum Call Minutes PER Month Call Restrictions Background Information Configuring Bandwidth ReservationBandwidth Reservation Bandwidth Reservation Select Bandwidth Reservation Bandwidth Reservation Configuration ElementsBandwidth Reservation Background Information Configuring Semipermanent Connections Using CfgeditSemipermanent Connections Semiperm Semipermanent Connections Background Information Semipermanent Connections Configuration ElementsCall Device Commands Throughput Monitor Call RestrictionsCSM AS a Call Control Manager Configuring CSM for Call Control Using CfgeditCall Control Management Select D Channel Callback Configuring D Channel Callback Using CfgeditChannel Callback Channel Callback Background Information Channel Callback Configuration ElementsModem Inactivity Timeout Configuration Elements Digital Modem Inactivity TimeoutModem Inactivity Timeout Background Information For IP routing Configuring Other Advanced OptionsConfiguring for a Digital Modem Using Cfgedit Digital ModemDigital Modem Background Information For IPX routingFor AppleTalk routing Digital Modem PPP Mode Using Cfgedit Default Async ProtocolDefault Async Protocol Configuration Elements Terminal Mode Using CfgeditCall Disconnect Using Cfgedit Data Timeout Value Autosense Feature PPP Configuration Elements PPP ConfigurationConfiguring PPP PPP Configuration PPP Background Information Configuring Default Line Protocol Using Cfgedit Default Line ProtocolLOG Options Default Line Protocol Configuration ElementsDefault Line Protocol Background Information Configuring LOG Options Using CfgeditFrom Log Options, select Call Detail Recording From Log Options, select Authentication Message DA logLOG Options Configuration Elements Select Add a Syslog ServerLOG Options Background Information UDP PortCentral Site Remote Access Switch System Messages CDR Log Report Call Detail Recording Events Event Report ContentsRecord Disconnect/Term Disconnect Event Report Contents Connect/Term Connect Event Report ContentsSystem Up Event Report Contents Reject Event Report ContentsTerm Succ Event Report Contents Term Fail Event Report ContentsCompression Options Verify Event Report ContentsConfiguring Compression Options Using Cfgedit Compression Options Configuration Elements Compression Options Background Information Central Site Remote Access Switch Tftp Background Information Configuring TftpTftp Configuration Elements File Attributes Configuring File AttributesFile Attributes Configuration Elements File Attributes Background Information ARP Verification and DiagnosisWAN Adapter INITIALIZED? Verifying the Base SystemHardware Resources OPERATIONAL? LAN Adapter INITIALIZED? To correct the problem, try the followingVerifying WAN Line Availability WAN Lines Available for USE?Dedicated Serial Connections LAN Connection OPERATIONAL? IP Router INITIALIZED? Try the following to correct the problemBridge INITIALIZED? Set-up Remote Device ConnectivitySecurity Rejection-Invalid Calling Line Id # To verify multi-level security MULTI-LEVEL SecurityIP Host INITIALIZED? IP Host ModeDisabled IP Host Mode OPERATIONAL?Try the following Dedicated Connections Alternate AccessesFrame Relay Connections Connections A Terminal Server Menu IP Routing Over a LAN Interface Verifying Routing ProtocolsIP Routing OPERATIONAL? IP Routing Over a WAN Interface Ping 192.100.1.1 return IP Routing Over a WAN Direct Host Interface 100.0.0.1 100.0.0.0 Host B 100.0.0.3 Host a 100.0.0.2 IP Routing Over a WAN Remote LAN Interface IP Routing Over a WAN Unnumbered Interface Ip filter trace discard return IP FiltersIP RIP INITIALIZED? If you are still experiencing problemsIp filter trace off return IP RIP Output Processing on a LAN Interface IP RIP Input Processing on a LAN Interface IP RIP Output Processing on a WAN Interface IP RIP Input Processing Operational on a WAN Interface IPX Router INITIALIZED? IPXIPX Routing Over a LAN Connection IPX Routing OPERATIONAL?IPX Remote LAN Connection Xxxx Triggered RIP/SAP IPX Routing Over a WAN ConnectionIpx trigreq device Appletalk Routing OPERATIONAL? Appletalk RoutingAppletalk Routing INITIALIZED? Appletalk Routing Over the LAN Connection Atalk port Appletalk Routing Over a WAN Connection USER’S Guide Snmp Verifying System OptionsUSER’S Guide Dial OUT Set Up Call Detail Recording Compression Peer Protocol-Rejects CCP CyberSWITCH does not have Compression EnabledReserved Bandwidth Verifying Dhcp Relay Agent Initialization Verifying the Relay Agent is EnabledVerifying the Relay Agent is Operational USER’S Guide Verifying Dhcp Proxy Client Initialization Verifying the Proxy Client is EnabledVerifying the Proxy Client is Operational Ip addrpool return Modem Callback Verifying a Semipermanent Connection Proxy ARP Proxy ARP LCD Messages TroubleshootingNormal Operation LCD Messages LCD MessagesLCD Message Groups Initialization LCD MessageError LCD Messages LCD Message Groups Auto Over Max Charge System Messages Normal Operation Messages Error MessagesInformational Messages Initialization MessagesSystem Message Summary Port LAN Adapter, operating in remote mode onlyPort LAN Adapter, operating in local and remote mode Call has exceeded the configured maximum durationAdapter does not respond adapter #’x’ Acct Warning code TimeoutAdapter #’x’ failed to respond from bootstrap Activation Failure- Session not activeAuth ACE Could not write service file Attempting to load FileName for UpgradeAttempt to initialize unconfigured DM card in slot slot # Auth ACE Could not create service fileAuth Radius Chap rejected for device device name Auth ACE Error receiving server log message acknowledgmentAuth ACE Login rejected user user name Auth ACE Node verification received Client initializedAuth Radius PAP rejected device device name Auth Radius Login rejected device device nameAuth Radius IP Host rejected IP Host id IP host Id Auth Radius IP Resolve rejected IP Address IP addressAuth Warning code 0007 Authentication mode mismatch Auth Tacacs Login rejected user user nameAuth Warning code 0001 Timeout Auth Warning code 0004 No authentication node availableBad auth result in smgrauthaanotify for device device name Booting System SoftwareBootstrap came alive on DM card in slot slot # Bootstrap came alive on WAN card in slot slot #CallID in use in Hostcallrequest Call Restrictions have been disabled by user commandCalculating CRC’s Callback type call back type ID is not currently supportedCall Restrictions will allow calls to be made this hour Call Restrictions have been enabled by user commandCall Restriction statistics reset for new day Call Restriction statistics reset for new monthCentral Site Remote Access Switch CCP Option Negotiation Failure, Non-Convergence detected Cause cause code received for Dlci dlci indexCause Code Event CCP Internal Decompression FailureCNTR-TMRTimed out waiting for TMR number interrupt Chap Authentication Failure remote device not respondingChannel in use in Hostcallrequest Connection disconnected for license violation Configured adapter # ’x’ type does not existCouldn’t find speech service slot #, port # Current monthly charges reset for new monthDHCP-P Failed to close UDP port x, erc = y Data link test successful DSL port # , CESDCE Data Rate is invalid on FrStartPVC Dedicated connection down slot #, port #DHCP-P UDP port 67 closed DHCP-P Proxy Client disabledDHCP-P Proxy Client enabled DHCP-P Proxy Client initialization failedDHCP-R Failed to open UDP port 67, erc = DHCP-R Relay Agent disabledDHCP-R Relay Agent enabled DHCP-R Failed to close UDP port 67, erc =DM card failed Flash download bad xx Srec DM card in slot slot # is not usable, could not upgradeDM card in slot slot # signals it is operational DM card type configured in slot slot # does not existDownloading Bootstrap to DM card in slot slot # DM card in slot slot # will not come out of resetDM upgrade started. Board=board #, Modem=modem # DM upgrade success. Board=board #, Modem=modem #Error downloading operational software to adapter ’x’ Edrv transmit error error codeError closing file ’s’ Error downloading bootstrap program to adapter #’x’Error initializing WAN card WAN card Id Error during channel initialization Access access indexError during port initialization Access access index Error during PVC initialization Access access indexError reading sdconf.rec file Error opening file \system\ethernt2.binError programming adapter #’x’ hardware Error reading file file name, section = section nameFailed to obtain Terminal info in smgrprocterminalauthsess Failed to get a tone signaling sessionFacility not subscribed Slot=slot # Port=port # Failed to allocate enough memory for Xilinx load fileFailure to allocate enough memory for Xilinx load file Failure during read of file ’s’Failure during Static RAM test on adapter # ’x’ Central Site Remote Access Switch Frame Relay event queue full File Access ErrFormatting Flash Memory Frietf detected PPP protocol from NAME, shutting down PVCInvalid Password password given Installing File Set into Flash MemoryInterrupt fault on WAN Adapter in Slot slot # Invalid Cllm received on Access access indexInvalid serial number in SERIAL.001, file is ignored IP Error from ESP datagram discardedIP x.x.x.x not added to the pool Unknown error y Invalid SERIAL.001 file present, file is ignoredIP Failed to de-register with IP Address Pool Manager erc=x IP Default Route not added, invalid next hop IP address #IP Invalid configuration for Network Interface dd IP Cannot stop Proxy Arp for IP address #, no cmd buf availIP Network initialized successfully on ddd.ddd.ddd.ddd IP Invalid Peer IP Address IP address, WAN IP Stream ClosedIP IP host is initialized successfully IP IP router is initialized successfullyIP Host Call Dropped XID was not received from remote Ipcp IP Address Pool Out of IP addressesIpcp Option Negotiation Failure, Non-Convergence detected Ipcp Remote device does not negotiate IP addressIP RIP Send queue full IP RIP All network interfaces usedIP RIP Buffers allocated IP RIP Initialization failed, unable to allocate buffersIPX IPX router initialized successfully IPX Invalid Ipxwc passedIPX Network initialized successfully on IPX Network Interface on LAN port port # not initializedIPX SAP Buffers allocated IPX SAP Space available in service tableIPX SAP Unable to add service, service table full Ipxwan IPX Internal Network Number must be configuredLAN Adapter HW upgrade may be required LAN Adapter Command TimeoutLAN Adapter configuration conflict LAN Adapter Fatal Error ReportedLAN Init Error LAN Adapter ResetLAN Adapter Response Timeout LAN Adapter System resource errorManage Mode updates have been successfully committed LAN Xmit ErrorLMI alarm on Access access index LMI alarm reset Access access indexMax ATI3 retries exceeded on modem modem # of slot slot # Memory Access TimeoutMismatch of configured and installed DM card in slot slot # Manual restart initiated on DM board in slot slot #Network loop between site1 and site Modem modem # of DM card in slot slot # is unusableModem revision on modem modem # of slot slot # failed Negotiation Failure with Semipermanent deviceNo Active List entry available in INM Network sent Cause Spid not supported slot #, port #Network sent Status with state = 0, tear down call No Active Calls Active SitesOffnode server lookup of Dial Out User failed Out of LAN Adapter transmit command descriptorsNo Sites Connected Not enough memory for Security moduleOut Svc # slot # , port # Auto For over 5 minutes Report problem to Phone companyPAP Identification timeout on remote device PAP Invalid password for name given by remote devicePost number, Hdlc #number Internal Loopback Test Failed PAP Remote device rejected System Information error messagePAP Unknown name name given by remote device Post number, Hdlc #number External Loopback Test FailedR2 not capable of Multichannel or Non-circuit calls PVC for Dlci dlci index not ActivePVC not allocated for dlci index PVC rcv wait q already fullRebooting RBS LIFAddTimer failureRBSoutSMchannel # Timeout waiting for Wink Reattempting to Install File Set into Flash MemoryRemote peer ID discrepancy Replace Lithium Battery Contact your RepresentativeReserved signal Received charge amount charge amountSecurity Rejection Caller did not negotiate security Security Rejection Invalid Password password givenSecurity Rejection No Password given by caller Security Rejection Timeout on Startup CompleteSlot #, port # Cfg Error Semipermanent. Device x disconnected by adminSemipermanent. Device x reconnected by admin Signal for unknown CallCmd task task IdSnmp Unable to obtain an Snmp Trap queue entry buffer Snmp Authentication failure, unknown community nameSnmp Snmp initialization failure unable to open UDP port Snmp Snmp initialized successfullySSB Post 24 i960iointreg Failure SSB Post 27 i960timer82c54FAILURESSB i960 Post number not equal to i386’s SSB Post 23 i960hostintreg FailureSSB Post 35 i960hdlc4 Failure SSB Post 32 i960hdlc1 FailureSSB Post 33 i960hdlc2 Failure SSB Post 34 i960hdlc3 FailureTCP Connection to CSM at IP address is UP Successfully Loaded Release X.Y Issue ZSwitch could not recognize phone number nnnnnnn System Clock Fault on Wan Adapter in Slot slot #Tftp Local error #5 UDP open failed Tftp Local error #2 Feature not initializedTftp Local error #3 Server not initialized Tftp Local error #4 UDP rejected packet filenameTftp Local error #19 Disk full filename Tftp Local error #14 Bad file nameTftp Local error #15 Bad mode string Tftp Local error #18 Unable to open file filenameTftp Remote error # 4 Text from Remote Host Tftp Remote error # 1 Text from Remote HostTftp Remote error # 2 Text from Remote Host Tftp Remote error # 3 Text from Remote HostTimeout on Startup Complete This card does not support R2 SignalingTimeout detected on connection establishment Timeout detected on receiving caller’s numberUnable to Decrypt Datagram Type mismatch of configured & installed adapter # ’x’Too many digits in TN in Hostcallrequest Tried to free unallocated buffer sub name, size=sizeUnable to get Digital Modem resource to place call Unable to open \config\devdb.nei fileUnable to open Modem Upgrade file Unable to restore original ISRs for Interrupt interrupt #Unknown Calling Bridge MAC address Unexpected error during transmission of LMI frameUnmatched Login Task Updating CyberSWITCH from FileNameX25 facilities error, facilities not allowed in PVC WAN card in slot slot # signals it is operationalWatchdog timeout detected on DM board in slot slot # Watchdog timeout detected on WAN board ’x’X25 facilities error, facility not allowed X25 facilities error, bad facility lengthX25 facilities error, invalid facilities length X25 facilities error, invalid DTE addressX25 facilities error, Rpoa not available X25 facilities error, facility not availableX25 facilities error, packet length negotiation not allowed X25 facilities error, window size negotiation not availableZone allocation failed, maximum capacity already configured Trace Messages Location Causes Call Trace MessagesCall Trace Message Summary -BRD CFG ACK Slot=slot # Configure ack slot #Inband treatment has been applied Init data link slot #, port #, ces Origination call address is non-ISDN Out configure port #Interworking unspecified cause Off-hook warning tone onReceived unknown progress value Received unknown signal valueOut init data link slot #, port # , ces Recall dial tone onIP Filters Trace Messages PPP Packet Trace Messages Configure Reject Configure RequestConfigure ACK Configure NAKTrace Message Summary Trace MessagesEcho Reply Discard RequestX25 DCE RR LCN logical channel number, number of bytes bytes X25 Data LCN logical channel number, number of bytes bytesSystem is sending a call request to the network Lapb Trace Message Summary Lapb Trace MessagesOut Lapb DM Lapb SabmeLapb UA Out Lapb DiscRemote Management System MaintenanceRemote Management SITE.HQ Usage Instructions Installation and ConfigurationIsdn TelnetEarlier Releases Central Site Remote Access Switch General tab Setting UP a NEW NumberSetting UP Server Type WIN95 DIAL-UP NetworkingDialing OUT Site HQ Isdn Users Report Files Statistics Files Config files Other Files Carbon Copy Changing Carbon Copy Configuration ParametersCOM1 Modem TypeBaud Rate Performing a File Transfer Using Carbon Copy Running Without Carbon Copy Copy LCNETWORK.NEI HC\CONFIG\NETWORK.NEIRemoving Carbon Copy Accessing Administration Services System CommandsAccessing Dynamic Management Setting the IP AddressViewing Operational Information Neif Connected Second column is the potential number of connections Viewing Throughput Information Throughput Monitor Contents Clearing Operational Information Saving Operational InformationCONFIGURATION-RELATED Commands Terminating and Restarting the CyberswitchLogin-Id Setting the Date and TimeTerminating Administration Sessions Appletalk Routing Commands State TypePhysical address Default zoneNetwork range FlagsZones valid DistanceZone Bridge CommandsCall Control Commands Indicates that a call request process has been initiated Call peer phone number data rate device bearer Calling phone number at data rate, device PPP Call Restriction Commands Call Detail Recording CommandsDhcp Commands Compression Information CommandsCSM Commands Digital Modem Commands Frame Relay Commands Clears all statistics associated with the fr stat command IP Routing Commands Disables the trace Mask used for the destination Time since the last update was received IPX Routing Commands Ipx diag host ipx address timeout Isdn Usage Commands LOG Commands LAN CommandsPacket Capture Commands Pkt display Banyan Vines Packet Detail Screen Bridged Packet Radius Commands Radius ipres Spanning Tree Port Information Serial Interface CommandsSnmp Commands Spanning Tree CommandsSpanning Tree Bridge Information Bridge priority of the root bridge TCP Commands Telnet Commands Possible send parameters are defined as follows Terminal Commands Tftp GET Tftp CommandsTftp PUT Trace CommandsUser Level Security Commands UDP CommandsWAN Commands Commands Clears the statistics for the default VC Connectivity Statistics System StatisticsThroughput Monitoring Statistics Call Restriction StatisticsCall Statistics Appletalk Protocol Statistics Appletalk StatisticsNumber of AppleTalk Echo requests received Count of AppleTalk Echo replies received Number of NBP LookUp Requests received Appletalk Port Statistics Call Detail Recording Statistics Bridge StatisticsDecompression Related Statistics Compression StatisticsCompression Related Statistics Common Dhcp Statistics Dhcp StatisticsDhcp Relay Agent statistics and Dhcp Proxy Agent statistics Dhcp Relay Agent Statistics Dhcp Proxy Client Statistics Frame Relay Statistics Access Related StatisticsDigital Modem Statistics Init PVC Related Statistics LAN Statistics IP Group Statistics IP StatisticsNumber of IP datagrams successfully reassembled Icmp Group Statistics IPX General Statistics IPX StatisticsNetwork number portion of the IPX address of this system IPX RIP Statistics IPX Route Statistics IPX Triggered RIP StatisticsIPX Triggered SAP Statistics IPX SAP StatisticsRIP Interface Statistics IPX Service StatisticsRIP Statistics RIP Global StatisticsSnmp Statistics Serial Interface StatisticsSnmpInBadVersions SnmpInGetNexts TCP Statistics Statistics for Local or Client Initiated Tftp Activity Tftp StatisticsStatistics for Server or Remote Initiated Tftp Activity Statistics for ALL Tftp Activity UDP Statistics WAN Frietf StatisticsWAN L1P Statistics Layer 1 PRI Error StatisticsLayer 1 General Statistics WAN StatisticsStatistics Maximum number of active VCs allowed at any time Virtual Circuit VC Related Statistics USER’S Guide Making Changes Using Cfgedit Routine MaintenanceINSTALLING/UPGRADING System Software Executing Configuration ChangesObtaining System Custom Information Configuration Backup and RestoreMaking Changes Using Manage Mode System Worksheets AppendicesSystem Adapters Ethernet Adapter Ethernet Adapter Side ViewBasic Rate Adapter BRI-4 Adapter Side ViewPrimary Rate Adapters PRI-8 Front View PRI-8 Adapter Side ViewPRI-23 Adapter PRI-23/30 Adapter Front View PRI-8 Expander Adapter Side View Front View Adapter Side View Front View RS232 Adapter Side View Digital Modems DM-8 DM-8 AdapterDM-24 Adapter OFF DM-24+/DM-30+ DM-24+ AdapterDM-24+ Adapter Back view USA System Worksheets Network Topology Lines System DetailsResources Over Isdn AccessesDevice Information Authentication Information Frame Relay InformationIP Routing Bridging and Routing InformationIPX Routing IP RoutingAppleTalk Routing/Port Information Appletalk RoutingFR DBU Main MenuIPX Snmp PPPPhysical Resources Menu SPI Options MenuWAN Rlan DhcpSnmp FR DBU SVC, PVC Security MenuCSM Radius Tacacs ACE CSM PPP STAC-L25CSM Radius TCP port Contacting Cabletron Systems Reporting ProblemsGetting Assistance Number of Pages Including this To Customer Service FromPhone FAX Cabletron Systems System Problem Report Administrative Console Commands Table Displays authentication messages Command Use Cdr verifyVerifies call detail recording servers are configured Clears administration screenAdministrative Console Commands Table Local log file only erases the call detail recording log Generates a triggered RIP/SAP update request toLocal log file only displays the call detail recording log Log cdr eraseChanges password for current access level Displays the current Tftp statistics Displays system errors and system messagesSpecified X.25 access Writes current authentication messages to diskAccess or the specified access Sets LCN index default value to mManage Mode Commands Table Address pool Adds/changes/deletes an IPX address from the IPXIpxsvc add/change/delete Adds/changes/deletes an IPX service Central Site Remote Access Switch Cause Codes Table Cause Codes Table USER’S Guide Central Site Remote Access Switch USER’S Guide Central Site Remote Access Switch Unknown Dec Value Hex Value CauseBr stat IndexAtalk Clid 195 Date Cr stats 596 crossover cableIp addrpool Help 113Ipcp Isdn usage commands 607 isolated modeNetstat -r 443 network flattening Modem devicesSTAC-LZS Offnode 213, 216Restart 585 restore Radius Server configuringSrcfilt 270 startne Snmp 352 snmp stats 614 socket number 336 softwareTrace lapb Terminal mode 33, 102, 392, 393Wan Wr 72, 584 ws 72