Enterasys Networks CSX5500, CSX6000, CSX7000 manual For IPX routing, For AppleTalk routing

USER’S GUIDE

Routing chapter). Note that Digital Modem does not support WAN RLAN or WAN unNumbered interfaces.

For IPX routing:

a.Make sure IPX routing is enabled.

b.Configure the LAN interface to represent local IPX Network that may receive and send datagrams (Configuring IPX chapter).

c.Configure the WAN interface to represent remote networks that may receive and/or initiate calls. Note that Digital Modem does not support WAN Remote LAN interfaces.

For AppleTalk routing:

a.Make sure AppleTalk routing is enabled.

b.Configure the AppleTalk ports to represent the AppleTalk Network that may receive and send datagrams (Configuring AppleTalk chapter). Note that Digital Modem does not support unnumbered WAN interfaces. For WAN interfaces, do not assign a port number.

3.Increase the login time-out value to 45 or 50 seconds to accommodate the Digital Modem (Configuring Default Line Protocol).

4.Select and configure Default Async Protocol. You may specify your default to be PPP protocol or Terminal Mode. PPP protocol allows for the transfer of async PPP data; terminal mode provides remote analog console access.

5.Select Call Control Options, and then Digital Modem Inactivity Timeout. Configure the amount of time, in minutes, you want the CyberSWITCH to wait before disconnecting an inactive connection.

6.Configure the Device List entries for all remote modem type devices (Configuring Device Level Databases chapter).

Note: You must properly set up your application at the remote site as well. Follow the steps outlined below:

At the remote site (with analog modem):

1.Reflect the same IP address as the WAN or WAN Direct Host Interface.

2.Configure login.

3.Configure password.

DIGITAL MODEM BACKGROUND INFORMATION

The Digital Modem feature offers an ISDN device the ability to use analog modems to initiate calls to the CyberSWITCH. The Digital Modem feature provides network access to telecommuters, mobile computer users, and other analog-modem users in remote areas not yet serviced by ISDN.

The Digital Modem feature consists of both hardware and software elements. The hardware consists of a separate adapter which includes up to 24 V.34+ modems or 30 K56Flex modems. It handles traffic from 300 bps to 56 Kbps.

390 CyberSWITCH