Enterasys Networks CSX7000, CSX5500, CSX6000 manual Select the type of authentication desired

USER’S GUIDE

Telnet session for authentication. Item (11), Terminal Server Security, allows you to specify type of security for this special connection. See following description.

AUTHENTICATION TIMEOUT

Note: If using the Security Dynamics Ace Server, modify the timeout value to be greater than the change frequency value of the SecurID cards. Refer to the Security Dynamics documentation for more information on this change frequency value. In addition, if you are using Connection Services Manager (CSM) for call control management, this timeout value must represent the amount of time for the authenticating agent to respond to the login attempt, and for CSM to respond as well. These times should be based on network configuration.

TERMINAL SERVER SECURITY

To specify the type of security for terminal server connections, select Terminal Server Security from the User Network Login General Configuration Menu. A menu similar to the following will be displayed:

Terminal Server Security Menu:
Authentication Database Location:			Status
1)	RADIUS	Authentication Server	NOT AVAILABLE
2)	TACACS	Authentication Server	AVAILABLE
3)	ACE Authentication Server		NOT AVAILABLE
4)	Use Administrative Login		AVAILABLE
5)	Do not	allow terminal access	AVAILABLE

Current Terminal Server Security is: Use Administrative Login

Select function from above or <RET> for previous menu:

Select the type of authentication desired.

USING MANAGE MODE

netlogin

Displays the current network login configuration data. After entering the netlogin command, you will be prompted for the type of login configuration information you want. The prompt will resemble the CFGEDIT screen in which this information was originally configured. You may display: user level security general configuration, login banners, login configuration specific to RADIUS, and login configuration specific to TACACS.

netlogin change

Allows you to change the current network login configuration data. After entering the netlogin change command, you will be prompted for the type of login configuration information you want to change. The prompt will resemble the CFGEDIT screen in which this information was originally configured. You may change: user level security general configuration, login banners, login configuration specific to RADIUS, and login configuration specific to TACACS.

224 CyberSWITCH