Enterasys Networks CSX7000, CSX5500, CSX6000 manual OFF-NODE Device Database Location

CONFIGURING DEVICE LEVEL DATABASES

Off-node Device Database Location

The following table identifies the configuration requirements for possible security options for IP Routing with PPP Bridge Devices.

Security Mode Configuration		On-node Device Table Configuration Data
Calling Line Id	PAP or CHAP	Calling Line Id	PAP Password	IP (Sub)
	Security		or	Network
			CHAP Secret	Number
Disabled	Enabled	Not Requested	Required	Required if
				only IP
				Routing is
				Enabled
Enabled	Enabled	Optional per	Required	Required if
		device entry		only IP
				Routing is
				Enabled
Enabled	Disabled	Required	Optional	Required if
				only IP
				Routing is
				Enabled

Note: If CHAP Security is enabled, and Outbound Authentication has not been disabled, a CHAP Secret must be entered for both the remote device and for the CyberSWITCH. Refer to System Information regarding the System Secret. If Outbound Authentication has been disabled, a CHAP Secret is not required for the remote device.

OFF-NODE DEVICE DATABASE LOCATION

CONFIGURING OFF-NODE DEVICE DATABASE LOCATION

USING CFGEDIT

1.Select Off-node Device Database Location from the Device Level Databases menu. If you need guidance to find this menu, refer to the instructions provided in the On-node Device Database configuration section. The following screen will be displayed:

Off-node Device Database Location Menu:

1)None (Use On-node)

2)CSM

3)RADIUS

Current Off-node Device Database Location is "None (Use On-node)".

Select function from above or <RET> for previous menu:

2.Select the location of the off-node device database, or select None in order to use the on-node device database.

Central Site Remote Access Switch 203