Enterasys Networks CSX6000, CSX5500, CSX7000 manual Init

USER’S GUIDE

INIT

The access state entered when the access is first initialized. The access has entered the LMI dialogue phase, but has not yet received an appropriate LMI STATUS message response.

UP

The access state entered when the access either has no LMI, or the LMI message exchange is confirmed.

DOWN

The access state entered when the access has been lost due to layer 1 loss, or after no response has been received on the LMI link.

# Line Ready Count

The number of times the physical link underlying the Frame Relay Access has become “ready” for use.

# Line Not Ready Count

The number of times the physical link underlying the Frame Relay Access has become unusable.

# Frames Received

The total number of frames received on the Frame Relay Access. This is the sum of the number of frames received on each PVC associated with this access.

# Frames Sent

This item refers to the total number of frames sent on the Frame Relay Access. This is the sum of the number of frames sent on each PVC associated with this access.

# Bytes Received

The total number of bytes received on the Frame Relay Access. This is the sum of the number of bytes received on each PVC associated with this access.

# Bytes Sent

The total number of bytes sent on the Frame Relay Access. This is the sum of the number of bytes sent on each PVC associated with this access.

# Reset Rx Seq

The number of times the receive sequence variable had to be reset. This event occurs when a receive sequence number of ‘0’ is received from the network.

# Reset Tx Seq

The number of times the transmit sequence variable had to be reset. This event occurs when a transmit sequence number of ‘0’ is received from the network.

# Lost Rx Seq

The number of times a receive frame was lost. This event is indicated by a break in the receive sequence numbers of received frames (i.e., the receive sequence number of a particular receive frame did not compare with the software’s expected receive sequence number).

# Lost Tx Seq

The number of times a transmit frame was lost. This event is indicated by a break in the transmit sequence numbers of received frames (i.e., the transmit sequence number of a particular receive frame did not compare with the software’s expected transmit sequence number).

640 CyberSWITCH