USER’S GUIDE

netlogin change

Allows you to change the current network login configuration data. After entering the netlogin change command, you will be prompted for the type of login configuration information you want to change. The prompt will resemble the CFGEDIT screen in which this information was originally configured. You may change: user level security general configuration, login banners, login configuration specific to RADIUS, and login configuration specific to TACACS.

NETWORK LOGIN BANNERS BACKGROUND INFORMATION

Allows you to customize the various system banners: login, change password, login successful and login unsuccessful. You may also define a “Welcome” banner and a “Message-of-the-Day” banner. You do so by creating a welcome.nei file and a motd.nei file on the system’s \config directory. (Refer to the Software Overview chapter for file information). The creation of these files is optional.

LOGIN CONFIGURATION SPECIFIC TO RADIUS SERVER

CONFIGURING RADIUS SERVER LOGIN INFORMATION

USING CFGEDIT

1.Select option (3), Login Configuration Specific to RADIUS Server from the Network Login Information menu. If you need guidance to find this menu, refer to the instructions provided in the Network Login General Configuration configuration section. The following screen will be displayed:

RADIUS Specific Device Login Menu:

1)Change Password Control Character is DISABLED.

2)Prompt Order for Device Login.

Select function from above or <RET> for previous menu: 1

2.Selection (1) from the RADIUS Specific Device Login Menu allows you to change the password control character:

Enter control character used to switch from LOGIN to CHANGE PASSWORD mode. Select the control character that you wish to us by typing

caret (‘^’) followed by another character (example: ^A), or ‘0’ to disable [Default = DISABLED]? <RET>

3.Selection (2) from the RADIUS Specific Device Login Menu allows you to customize the prompt order for device login. This prompt is particularly important, because the order of prompts must be the same as the order expected by the RADIUS server. Selection (2) displays the following:

226 CyberSWITCH

Page 226
Image 226
Enterasys Networks CSX6000 Login Configuration Specific to Radius Server, Network Login Banners Background Information