Paradyne 6800 Shutting Down the UIP Application Program, Press Return to continue Press Enter

System Start-Up and Shutdown

3.To select Start the system, TYPE: 1

PRESS: Enter

The following message displays:

The [UIP] start facility has been successfully added to the system. The [UIP] will be started automatically, please wait...

Although the UIP is active, it only becomes functional if the NMS host is active. If the host is not active, the UIP will wait until the NMS host becomes active.

The following message displays:

Press RETURN to continue PRESS: Enter

4.The Network Management System Menu displays. At this point the UIP is active and functional if the NMS host is active (up and running).

TYPE: 5

PRESS: Enter

to select Return to Console Login.

5.At the login prompt, TYPE: ffw PRESS: Enter

The system prompts for password.

TYPE: the full-feature workstation password

PRESS: Enter

The welcome message appears followed by the FFW Login window (see Figure 6-2).

Shutting Down the UIP Application Program

To shut down the UIP application program, perform the following steps:

1.The Network Management System Menu displays. To begin shutdown, select Stop the system.

TYPE: 2

PRESS: Enter

2.The following message displays:

There are [UIP] processes running,

The processes will be shut down please wait...

The [UIP] facility has been removed.

6800-A2-GN22-30 January 1997 6-9