Paradyne 6800 manual System 15000 Ð Expansion Slots

COMSPHERE 6800 Series Network Management System

Installing Circuit Cards in the System 15000

The System 15000 contains eight EISA expansion slots. Figure 2-22 shows the position of all the expansion slots within the System 15000 processor chassis. Each card should be installed in a specific slot. Table 2-5 gives the proper slot assignment for each card.

Slot Cover

Screw

IPC-1600

First DCP/MUXi

Second DCP/MUXi

ECA Card

Video Card

494-14502-01

Figure 2-22. System 15000 Ð Expansion Slots

To insert the circuit cards into a slot, perform the following steps:

1.Locate the EISA slots inside the System 15000 (see Figure 2-22).

2.Take the first circuit card you intend to install and locate the proper slot for that card (see Table 2-5).

3.Using a Phillips screwdriver, remove the slot cover screw and the slot cover for the slot in which you intend to install the card. Save the screw for later. Save the slot cover in case the card is removed in the future.

2-42 January 1997 6800-A2-GN22-30