Paradyne 6800 manual Preinstallation Checks for the Integral Ethernet Card

Preparing the Processors

Preinstallation Checks for the Integral Ethernet Card

The Integral Ethernet Card is installed at the factory but the user should check that the settings on the card are properly configured.

1.Check the jumper settings on the Ethernet card. Confirm that the 7-pin dip jumper is set between U7 and U8 to set the card for Thick net transmission (see Figure 2-3).

2.Be sure that the Ethernet card is properly seated in the slot above Slot 1 and the cable is connected to the J5 and J1 pin clusters.

J5J1

U7 U8 U9

THICK THIN

493-14255

Figure 2-3. Integral Ethernet Card

6800-A2-GN22-30 January 1997 2-7