Paradyne 6800 manual Unix Software for the UIP, System 5000 Boot Menu Installing Unix on UIP

Loading and Restoring Software

Unix Software for the UIP

To install the UNIX Operating System on the UIP's hard disk, you need the following software:

•A floppy disk labeled 6800 UIP Application Volume 1

•A floppy disk labeled 6800 UIP Application Volume 2

•A cartridge tape labeled 6800 UIP Application Volume 3

•A floppy disk labeled 6800 UIP Application Volume 4

•A cartridge tape labeled 6800 UIP Application Volume 5

With these items, perform the following steps:

1.Turn on the UIP and make sure the RESET key is in the RUN position. The UIP begins the boot process and runs through its internal memory checks. When the memory check is over, the following message appears:

Press space bar to interrupt autoboot

NOTE

If an error message about memory appears, ignore it and continue the procedure.

PRESS: the spacebar immediately

The menu in Figure 5-6 appears:

Select [1] to boot from Hard Disk

Select [2] to boot from Floppy

Select [3] to boot from Tape

Select [4] to enter BIOS setup

Enter Option:

492-13954

Figure 5-6. System 5000 Boot Menu (Installing UNIX on UIP)

NOTE

If this menu does not appear you missed the time-out window. You must restart the procedure.

6800-A2-GN22-30 January 1997 5-41