Paradyne 6800 manual Initializing the NMS Database, Type root

COMSPHERE 6800 Series Network Management System

Initializing the NMS Database

CAUTION

This action destroys the database. Do not initialize the database unless this is a first-time installation.

To install the 4.2 Release for the first time, you must create and initialize the NMS database. To do this, perform the following steps:

1.TYPE: root

NOTE

You cannot initialize the database from any other login.

PRESS: Enter

TYPE: root password

PRESS: Enter

2.Once you are logged in, TYPE: cd /usr/nms/adm PRESS: Enter

Then,

TYPE: ./installDb

PRESS: Enter

NOTE

Do not reboot the system after executing InstallDb. The initialization parameters will be lost. Rebooting should be done after the 6800 has been started up for the first time.

5-28 January 1997 6800-A2-GN22-30