Paradyne 6800 manual Configuring the Token Ring Network on the 5000 Host/UIP

COMSPHERE 6800 Series Network Management System

NOTE

Messages indicating that the link kit is only partially installed may be ignored. Press Enter if required to by such messages.

7.The system asks you to insert the requested volume. Do not remove the Token Ring Host/UIP Application floppy; leave it in the floppy disk drive and

PRESS: Enter

8.When all files are read, the following screen appears:

Executing Proteon ProNet-4/16 LLI RapiDriver Disk Init Script Installing the pro driver

After installing the Proteon ProNet-4/16 LLI RapiDriver Disk, please use netconfig or mkdev <driver> to add drivers into your system.

Press return to continue . . .

PRESS: Enter

9.The system prompts:

Press any key to continue . . .

PRESS: Enter

10.The Products Currently Installed menu appears: TYPE: q

11.Using the ↓↑ keys, select yes to exit the custom install procedure.

12.Remove the floppy disk from the drive, remain in system maintenance mode, and continue the installation of the Token Ring feature with the section, Configuring the Token Ring Network on the Host/UIP.

Configuring the Token Ring Network on the 5000 Host/UIP

To configure the network for the installed Token Ring card on an Altos 5000 processor, perform the following steps:

1.At the UNIX prompt: TYPE: netconfig PRESS: Enter

5-36 January 1997 6800-A2-GN22-30