Paradyne 6800 manual Connecting Remotely

Connecting the Components

To establish the connection, perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to an available port on the IPC-1600 card in the host processor.

2.Connect the other end of the 035-0153-0031 cable to the 002-0039-0031 connector.

3.Connect the 002-0039-0031 connector to the 002-0051-0031 connector.

4.Connect one end of the 035-0152-0031 cable to the 002-0051-0031 connector.

5.Connect the other end of the 035-0152-0031 cable to the terminal port on the StarKeeper.

Connecting Remotely

To connect a remote StarKeeper NMS to the host processor, you will need the following materials:

•Two 035-0153-0031 cables

•Two 002-0039-0031 connectors

•Two DCE devices with the following characteristics:

ÐAsynchronous

ÐFull-duplex

ÐFlow control ON

ÐBit rates of 1200, 2400, 4800, 9600 bps

•Two 002-0050-0031 connectors

•Two 035-0152-0031 cables

To establish the connection, perform the following steps at the host processor end:

1.Connect the grounded end of te 035-0153-0031 cable to an available port on the IPC-1600 card in the host processor.

2.Connect the other end of the 035-0153-0031 cable to the 002-0039-031 connector.

3.Connect the 002-0039-0031 connector to the local DCE devices.

Perform the following steps at the remote end:

1.Connect one end of the 035-0152-0031 cable to the terminal port of the StarKeeper.

2.Connect the other end of the 035-0152-0031 cable to the 002-0050-0031 connector.

3.Connect the 002-0050-0031 connector to the remote DCE devices.

6800-A2-GN22-30 January 1997 4-55