Paradyne 6800 manual Type q Press Enter

Loading and Restoring Software

NOTE

Consult your System Administrator to determine whether to specify a net mask, a broadcast address, or DOMAIN name different from the default. Choose the default when using the basic network configuration as described in the Network Pre-Installation Preparation section.

PRESS: Enter

The system prompts:

Does the interface use a broadcast address of all 1's? (y/n) (default:y):

PRESS: Enter

The system prompts:

Enter the broadcast address for this interface (default: nnn.nnn.255.255):

PRESS: Enter

The system prompts for verification of the previously entered values:

Interface Address:

Netmask:

Broadcast Address:

Are these values correct? (y/n):

If the values are not correct, respond n. The system again requests entry of the Internet Address. If the values are correct,

TYPE: y

PRESS: Enter

The system prompts:

Enter DOMAIN name for ªnode nameº or enter return to use [net.COM]: Where: node name is the name of the system on which you are installing. PRESS: Enter

The system prompts:

99 Pseudo ttys are currently configured; do you want to:

1.Add Pseudo tty

2.Remove Pseudo tty

Select an option of enter q to quit [q]:

TYPE: q

PRESS: Enter

The system displays:

TCP/IP Configuration Complete

6800-A2-GN22-30 January 1997 5-57