Paradyne 6800 manual Do you want this kernel to boot by default? y/n Type y

COMSPHERE 6800 Series Network Management System

The system prompts:

New password:

TYPE: your chosen password

PRESS: Enter

The system prompts:

Re-enter new password:

TYPE: your chosen password again

PRESS: Enter

26.The system now rebuilds the kernel and installs devices. As this transpires, the following message appears:

The UNIX Operating System will now be rebuilt. This will take a few minutes. Please wait.

Root for this system build is /.

Once the kernel has been rebuilt, the following prompt appears:

Do you want this kernel to boot by default? (y/n): TYPE: y

PRESS: Enter

27.The system will back up the old UNIX and install the new one. When this is done, the following message appears:

Do you want the kernel environment rebuilt? (y/n): TYPE: y

PRESS: Enter

28.The installation process is now complete. The following message appears:

The kernel has been rebuilt. Shutdown and reboot the system.

The installation of the 6800 NMS APPLICATION VOLUME 5 is now complete.

29.Remove the floppy disk and cartridge tape.

30.At the prompt: TYPE: cd / PRESS: Enter

If you are loading an Altos 5000 system, go to Step a. If you are loading an Altos 15000 system, go to Step b.

a. For an Altos 5000 system, enter the following command to reboot in multi-user mode:

TYPE: shutdown -g0 -y -i6

PRESS: Enter

5-18 January 1997 6800-A2-GN22-30