Paradyne 6800 manual One Local Acculink Multiplexer and One 719 Networker

Connecting the Components

One Local ACCULINK Multiplexer and One 719 NETWORKER

If only one 74x multiplexer is present at the local site, a 719 NETWORKER can be used to multiplex the alert and cut-through information over a single supervisory data link (SDL).

The alert and cut-through connections enter the 719 NETWORKER via channel ports. The SDL exits the 719 NETWORKER through a link and connects to one of the 74x NAPs. The second NAP is devoted to the command port. Each multiplexer port on the 74x and 719 NETWORKER must be software configured. Figure 4-18 shows the connections for one local ACCULINK multiplexer and one 719 NETWORKER.

Host

Processor

	035-0153-0031		719 NETWORKER
Event
Port		Channel
				Link
External		Channel			835-3564-0011
Systems
	035-0153-0031
Port
Command				NAP
	035-0153-0031			Port 1
Port
				NAP
				Port 2
IPC-1600
Card				ACCULINK MUX

= 002-0039-0031 Connector

= 002-0021-0031 Connector

493-13910-02

Figure 4-18. Connections for One Local ACCULINK Multiplexer and One 719 NETWORKER

6800-A2-GN22-30 January 1997 4-31