Paradyne 6800 manual Opening the System

Preparing the Processors

Opening the System 15000

CAUTION

1.Make sure the ac power cord is not connected to the System 15000 before opening the computer and attempting to perform any field installation activity.

2.To prevent static discharge that may damage the hardware, wear a ground strap or otherwise ground yourself to the chassis before opening the computer and installing any circuit cards.

To open the Altos System 15000 and install circuit cards, perform the following steps:

1.Slide the top cover towards the rear of the chassis approximately .75I, as shown in Figure 2-15, until the locking pins on the underside of the cover disengage. Lift the cover straight up and set it aside.

6800-A2-GN22-30 January 1997 2-31