Paradyne 6800 manual Do you want this kernel to boot by default? y/n Type y, Press Ctrl-d

Loading and Restoring Software

For a negative response, the following message appears:

The IPC-1600 ports card software driver will be removed from the system. Continue? [y/n]:

To continue,

TYPE: y

PRESS: Enter

16.The system now rebuilds the kernel and installs device names. As this transpires, the following message appears:

The kernel will now be rebuilt.

This will take a few minutes. Please wait. Root for this system build is /.

Once the kernel is rebuilt, the following prompt appears:

Do you want this kernel to boot by default? (y/n): TYPE: y

PRESS: Enter

17.The system back up the old UNIX and installs the new one. When this is done, the following message appears:

Do you want the kernel environment rebuilt? (y/n): TYPE: y

PRESS: Enter

18.The installation process is now complete. The following message appears:

The kernel has been rebuilt. Shutdown and reboot the system.

The installation of the 6800 NMS Application Volume 5 is now complete.

19.Remove the floppy disk and cartridge tape.

20.At the # pompt, to initiate a shutdown and automatically reboot the system, enter the following commands:

TYPE: cd /

PRESS: Enter

TYPE: shutdown -g0 -y -i6

PRESS: Enter

If no further action is taken, the system boots up in multi-user mode. To speed up the process,

PRESS: Ctrl-d

when prompted for normal start-up.

6800-A2-GN22-30 January 1997 5-49