Paradyne 6800 manual Checking the Migrated Database

COMSPHERE 6800 Series Network Management System

Checking the Migrated Database

Following NMS start-up, the integrity of the migrated data should be verified. The following procedures may be executed for that purpose.

1.Bring up the System Management window and execute the Create Network Map (crnm) command. Refer to the COMSPHERE 6800 Series Network Management System Core Command Reference Manual for details on all commands.

2.Following completion of the Create Network Map (crnm) command, bring up the network map window and inspect the network map visually.

NOTE

Circuit names and device addresses are not displayed on the Release 4.2 network map. Device names and site names are displayed.

3.Execute the Display Device Profile (dsdp) command to verify profiles for three devices. Verify the accuracy of the information.

4.Execute the Display Site Profile (dssp) command to examine profiles for three sites. Verify the accuracy of the information.

5.Execute the Display Facility Profile (dsfp) command to examine facility profiles associated with three devices.

6.If the ACCULINK Network Manager (ANM) is installed, execute the List Facility Profile (lsfp) command, selecting T1 for the facility type and m2/* for Device(s). Compare the screen results with a hard copy output from the List Facility Profile (lsfp) command on the source system.

7.If ANM is installed, execute the Hardware Module Summary (hms) command on three multiplexer devices.

8.Execute the Device Health Status (dhs) command on available device types, e.g., three DATAPHONE II devices, three COMSPHERE devices, and three ANALYSIS devices.

9.Run Alert History reports to list Historical Alerts using the Detailed Alert Report (dar) and Alert Report Summary (ars) commands.

10.If user group permissions have been customized, use the SQL Customization Package to examine the command_view table. Correct any incomplete migration of data and account for the new capabilities of Release 4.2, specifically, that all Network Control commands can now have customized user group levels. Likewise, if alert text or alert group names have been customized, redo the customization after the migration is completed.

11.When the migration is completed, execute the Edit Alert Monitoring State (edams) command to turn on polling. NMS will then automatically acquire the current feature packages/versions for the multiplexer networks, if ANM is installed.

7-40 January 1997 6800-A2-GN22-30