Paradyne 6800 manual Press Enter, Loading configuration files Please wait

Preparing the Processors

The following messages appear.

Current configuration information will be lost if you continue.

Select <Ok> to continue or select <Cancel> to return to previous screen

7.Select <Ok> using the → / ← keys and PRESS: Enter

A list of configuration files appears. Refer to Table 2-8 for possible file names and applicable configurations.

8.Use the ↓↑ keys to select the proper configuration file and

PRESS: Enter

The following messages appear.

Loading configuration files

Please wait . . .

The maximal configuration of circuit card descriptions and settings will be automatically loaded. Use the ↓↑ keys to review the cards in the loaded configuration. Delete any cards that you do not have installed on the system. To delete a card configuration, highlight the card description on the screen using the ↓↑ keys and press the Delete key.

9.To verify that all resources have been correctly configured: PRESS: Alt + v (for ªviewº)

PRESS: r (for ªResourcesº)

to display the Resource Map. This display lists the settings for each component of the system. Use the ↓↑ keys to scroll through the Resource Map and verify that all appropriate settings are correct. Refer to Table 2-1 for Altos 5000 host, Table 2-3 for Altos 5000 UIP, and Table 2-5 for Altos 15000 host.

If the settings are correct, PRESS: Enter

PRESS: Alt +s (for ªSystemº)

PRESS: x (for ªexitº)

to exit. Select Save configuration and exit by pressing the s key when prompted. Reboot the system to allow the new settings to take effect. Remove the EISA Configuration Disk from the floppy drive and store it safely.

NOTE

At any time in running the ECU, you may reload the configuration file, which contains the correct settings and begin again the process of deleting those circuit card descriptions which are not installed. To do this, press Alt + s (for ªSystemº) and go to Step 6.

6800-A2-GN22-30 January 1997 2-49