Paradyne 6800 manual Running Cmos Setup on the Altos, Press Esc

Preparing the Processors

Running CMOS Setup on the Altos 15000

Once the circuit cards are configured and installed, the system date and time and memory ranges for add-on cards should be set. This procedure requires the system to be restarted using the following steps:

1.Power on the system and repeatedly PRESS: Ctrl-Alt-Esc

2.The BIOS Setup Utility menu appears. Using the ↓↑ keys, select System Configuration Setup and

PRESS: Enter

PRESS: Page Down

3.Page 1 of the System Configuration will appear. Using the ↓↑ keys, select the correct date and time.

4.Page 2 of the System Configuration appears. At the bottom of the page is a field, Memory 0F00000H:0FFFFFFH. Using the ← / → keys, change the value System to Add-on Card.

PRESS: Esc

5.A confirmation box appears; to save the CMOS data, PRESS: Enter

6.The main BIOS Setup Utility menu appears. PRESS: Esc

7.The system automatically reboots.

6800-A2-GN22-30 January 1997 2-45