Paradyne 6800 manual Type edit XONE.CFG

Loading and Restoring Software

NOTE

For the 15000 platform, the division of full-feature workstations among the three processors should be:

Host Uip-1 Uip-2

7 3 14

Configurations with lower numbers of full-feature workstations should retain equivalent ratios among the processors for best performance.

5.If the workstation is connected to a UIP and while still in the XONE directory: TYPE: copy UIP.CFG XONE.CFG

PRESS: Enter

TYPE: edit XONE.CFG

PRESS: Enter

The DOS editor displays the XONE.CFG file. You should look for the line which starts with CONN_COMMAND and change WSNAME to the name of the workstation. Look for the line beginning with CONN_HOST and change NMSUIP to the name of the UIP machine.

6.If the workstation is connected to an NMS host and while still in the XONE directory: TYPE: copy HOST.CFG XONE.CFG

PRESS: Enter

TYPE: edit XONE.CFG

PRESS: Enter

The DOS editor displays the XONE.CFG file. You should look for the line which starts with CONN_COMMAND and change WSNAME to the name of the workstation. Look for the line beginning with CONN_HOST and change NMSHOST to the name of the host machine.

7.Reboot the processor to ensure that all changed parameters are properly loaded.

6800-A2-GN22-30 January 1997 5-69