Paradyne 6800 manual Connecting the Current Version 719 Networker

Connecting the Components

Connecting an External Systems Port

To connect a Supervisory NAP on the 74x multiplexer to the external systems port on the host processor, you will need the following materials:

•035-0153-0031 cable

•002-0039-0031 connector

To establish the connection, perform the following steps:

1.Connect the 035-0153-0031 cable to the IPC-1600 port that is configured as the external systems port.

2.Connect the other end of the 035-0153-0031 cable to a 002-0039-0031 connector.

3.Connect the 002-0039-0031 connector to the NAP on the 74x multiplexer that has been configured as the Supervisory NAP.

Connecting an Event or Command Port

To connect an Event Datagram NAP on the 74x multiplexer to the event or command port on the host processor, you will need the following materials:

•Two 035-0153-0031 cables

•Two 002-0021-0031 connectors

To establish the connection, perform the following steps:

1.Connect 035-0153-0031 cables to the IPC-1600 ports that are configured as the event port and the command port.

2.Connect the other end of each 035-0153-0031 cable to the 002-0021-0031 connector.

3.Connect one 002-0021-0031 connector to the NAP on the 74x multiplexer configured as the command port.

4.Connect the other 002-0021-0031 connector to the NAP on the 74x multiplexer configured as the event port.

Connecting the Current Version 719 NETWORKER

The 719 NETWORKER can connect to the host processor one of two ways, depending on the version of the firmware. To determine the firmware configuration, connect a VT100 terminal to Channel 0 and power up. If the banner displays ACCULINK 3.K or higher, the NETWORKER can support all three ports. If the banner displays an earlier version number, the 719 networker cannot support the command port. In this case, a 74x multiplexer must be used with the 719 Networker.

Connecting an External Systems Port

To connect the 719 NETWORKER, you will need the following materials:

•035-0153-0031 cable

•002-0039-0031 connector

6800-A2-GN22-30 January 1997 4-33