Paradyne 6800 manual Altostcp en0 Select a chain to remove, Remove altostcp en0 y/n

COMSPHERE 6800 Series Network Management System

The system displays the current chains including the following:

2.altos_tcp -> en0

Select a chain to remove:

TYPE: 2

PRESS: Enter

The system prompts for confirmation:

Remove altos_tcp -> en0 (y/n):

TYPE: y

PRESS: Enter

The chain is removed; the existing chains are redisplayed followed by the menu of available options. You need to reestablish the chain that was just removed.

TYPE: 1

PRESS: Enter

The system displays the top-level chain descriptions and prompt:

Select top level of chain to Add or q to quit:

TYPE: 1 (for altos_tcp)

PRESS: Enter

The system prompts:

Select next level of chain to Add or q to quit:

TYPE: 5 (or appropriate number for en0)

PRESS: Enter

The system prompts for confirmation:

Add chain altos_tcp -> en0 (y/n):

TYPE: y

PRESS: Enter

The system displays status messages and then requests:

Please enter the following information in order to configure en0 Enter the internet address of this interface:

TYPE: internet address

in the form nnn.nnn.nnn.nnn

Where: nnn is an integer from 1 to 255

PRESS: Enter

The system prompts:

Enter the netmask for this interface (default: 255.255.0.0):

5-56 January 1997 6800-A2-GN22-30