Paradyne 6800 manual Strike enter when ready or Esc to stop Press Enter

Loading and Restoring Software

INIT: SINGLE USER MODE

Type CONTROL-d to proceed with normal startup, (or give root password for system maintenance):

10.For system maintenance mode: TYPE: root password PRESS: Enter

NOTE

You have approximately 10 seconds to press the Enter key to select system maintenance. Failure to do so within the 10-second window defaults the system to normal start-up. If this occurs, a reboot is necessary.

11.Insert the 6800 UIP Application Volume 4 floppy disk and 6800 UIP Application Volume 5 cartridge tape.

12.At the # prompt, TYPE: installpkg PRESS: Enter

The system prompts for the tape and floppy and prompt:

Strike enter when ready or Esc to stop PRESS: Enter

13.After the disk and tape are read, the following message appears:

Done reading tape...

TCP/IP Runtime Serialization

Enter your serial number or enter q to quit

CAUTION

The serial number and activation key entered must be unique across all TCP/IP nodes on the network to which the UIP is connected. The TCP/IP daemon will shut down for both nodes having equal serial number or activation keys.

TYPE: serial number from distribution package

PRESS: Enter

The system prompts:

6800-A2-GN22-30 January 1997 5-45