Paradyne 6800 manual Enter this systems IP address, Enter a subnet mask

COMSPHERE 6800 Series Network Management System

20.The system prompts:

Select network configuration

1.Grafpoint's own built-in TCP/IP

2.FTP Software's PC/TCP

3.Sun Microsystem's PC/NFS ver's 3.5Ð3.9

4.Beame and Whiteside BW-TCP

5.Woolongong's Pathway TCP

Enter selection of `q' to Quit [1]:

PRESS: Enter

21.The system then prompts:

Select Network Interface

.

.

.

9. Packet Driver

Enter selection or `q' to Quit:

TYPE: 9

PRESS: Enter

Will you be using more than one Network board in your machine with more than one packet driver loaded (y/n/q)? [n]:

PRESS: Enter

NOTE

If you are using basic network configuration, check the IP address in Table 5-1. Otherwise, consult with your System Administrator to ensure entering the correct IP address.

Enter this system's IP address:

TYPE: IP address in format ªxxx.xxx.xxx.xxxº where xxx is a number from 1 to 255 inclusive

PRESS: Enter

NOTE

Consult with Network Administrator to verify correct subnet mask.

Enter a subnet mask [255.0.0.0]:

PRESS: Enter

5-74 January 1997 6800-A2-GN22-30