Manuals / Paradyne / Computer Equipment / Switch

Paradyne 6800 manual Type n Press Enter

Models: 6800

1 351

Download 351 pages 51.03 Kb

Page 309

COMSPHERE 6800 Series Network Management System

15.Insert the proper tape in the cartridge drive and TYPE: c

PRESS: Enter

The following messages appear:

Checking files/directories, please wait ...Removing old files/directories, please wait ...

Restoring files/directories, please wait ...

Restore of files/directories completed. Please remove tape and insert the tape containing the INFORMIX database backup.

16.Remove the tape labeled ``Database Files/Directories Backup'' and insert the INFORMIX database backup tape in the cartridge drive.

The system prompts:

Press [Return] to continue PRESS: Return

Select the following options under the INFORMIX menu:

•Archive

•Restore

The system will ask a series of questions; respond accordingly.

The system will prompt:

Do you have another level of tapes to restore? (y/n)

TYPE: n

PRESS: Enter

17.The system will prompt: Is there a logical log tape to restore? (y/n)

TYPE: n

PRESS: Enter

When the base INFORMIX menu appears, select Exit

Now rebuild the NMS database indices.

18.When the pound sign (#) prompt appears, TYPE: exit

PRESS: Enter

to return to the Console Login: prompt.

7-38

January 1997

6800-A2-GN22-30

Image 309

Paradyne 6800 manual Type n Press Enter

Contents

Area Code Change Comsphere 6800 Series Network Management System Warranty, Sales, and Service Information TrademarksCopyright 1997 Paradyne Corporation. All rights reserved Important Safety Instructions FC F C F CC Table of Contents Connecting the Components Running Diagnostics List of Figures Comsphere 6800 Series Network Management System Vii List of Tables Abstract Objectives And Reader AssumptionsDocumentation Conventions Related DocumentsTypeface Communications Products Support Command Reference Manual Overview IntroductionWith UIP Ð 5000 5000 HostAltos Selecting a Site Contents List Optional Components User Interface ProcessorNMS Application Software License AgreementsBasic-Feature Workstations Full-Feature WorkstationsUser Documentation in addition to this manual PrintersPreparing the Processors Overview Hardware Altos System 5000 HostAddress Description Circuit CardsSystem 5000 Ð Cover Fasteners Opening the System 5000 HostSystem 5000 Ð Disengaging Cover Locking Pins Integral Ethernet Card Preinstallation Checks for the Integral Ethernet CardOptional Host Upgrade Packages Second and Third Hard Disk Jumper Settings IPC-900 Ð Switch and Jumper Locations Preinstallation Steps for the Analysis NMS PackagePreparing the Processors Emulex DCP-286i Ð Switch and Jumper Locations DCP/MUXi Ð I/O Address Switch Settings SWI Description Preinstallation Steps for the 16 Control Channel PackageOptional Host Upgrade Procedures Preinstallation Checks for the Token Ring CardInstalling the Third Hard Drive in the System Altos 5000 Disk Bay Installing Circuit Cards in the SystemSystem 5000 Ð Expansion Slots 10. Emulex DCP/MUCi Ð Circuit Card and Cable Assembly Installing the Octopus Cable AssemblyConnecting the Ethernet Card to the Network Converting Host Processor R3.x to R4.2Closing the System 11 -Port Cabinet Assembly Installing the 16-Port Cabinet Assembly12 -Pin Headers P3 and P4 Connector Identification Altos System 5000 UIP 13. IPC-1600 Ports Cabinet AssemblyOpening the Altos 5000 UIP Installing Additional Memory on the SystemType Preinstallation Checks for the Integral Ethernet Card BootPress Enter Serial Port Upgrade Package for the UIP Optional UIP Upgrade Packages14. IPC-1600 Ð Switch and Jumper Locations and Settings Preinstallation Steps for the IPC-1600 Upgrade CardConverting Altos 5000 Processors to Release 4.2 UIPs Optional UIP Upgrade ProceduresClosing the Altos 5000 UIP UIP Conversion ProceduresInstalling the 16-Port Cabinet Assembly Altos System Opening the System 15. System 15000 Ð Removing the Top Cover 16. System 15000 Ð Removing the Side Panel 17. System 15000 Ð Removing the Front Panel 18. Altos 15000 Main Processor Card and MPX Installing the MPX Processor19. Altos 15000 Motherboard and Bus Connectors Installing the Second and Third Hard Disks on the System 20. Altos 15000 Showing the Hard Disk Bay Installing the Second and Third Hard Disks in the System21. Altos 15000 Memory Board and Memory Modules IPC-1600 Ð Memory Switch Settings DSI Switches Preinstallation Steps for the IPC-1600 Card on the SystemDCP-MUXI Ð I/O Address Switch Settings Description Preinstallation Steps for the DCP-MUXi Cards on the System22. System 15000 Ð Expansion Slots Closing the System 23. System 15000 Ð Top Cover Locking Pins Press Esc Running Cmos Setup on the AltosEisa Configuration Utility To select boot from floppy Press spacebar to interrupt autoboot25. Main Menu Loading configuration files Please wait Changing the Token Ring Configuration Type dType Preinstallation Checks for the EtherLink II Card Full-Feature WorkstationToken Ring I/O Address Switch Setting Switches Installation of the Token Ring Network Interface Card28. Proteon p1392 Card Switching off the Cache on 486DX6386/25 Circuit Cards to Be Removed Release 29. NAU Memory Jumper Locations and Settings Want to QUIT? Full-Feature Workstation Comsphere 6800 Series Network Management System Preparing the Printers DL5600 Ð Front Control Panel Fujitsu DL5600LPI 10 CPI11.0 SETBIT 8NONE9600 DL3400 Ð Front Control Panel Fujitsu DL3400DL3400 Ð Setup Mode Opening Menu Cour 10CPI13.6INCH Comsphere 6800 Series Network Management System DL3600 Ð Front Control Panel Fujitsu DL3600Emulate DPL24C+ Font Cour Quality Letter Pitch DL3600 Ð Hardware Settings Correct Value Fujitsu DX2300 DX2300 Ð Memory and Serial Interface Card AccessDX2300 Ð Memory Card Settings Memory Card DIP Switch Settings Function DX2300 Ð Serial Interface Card Settings 9600 Baud Serial Interface Card Settings Switches 6Ð8 Speed Serial Interface Card Settings Switches 1Ð5 FunctionItoh C-240 Printer Functions Printout Function No Menu No Status Configuring Network Printers Network PrintersRemote Printing with the Unix SCO/S5R4 Print Spooler Aaaa /usr/spool/lp/bin/rlpcmd bbbb /usr/bin/lp ± d cccc Press Enter Press EscIP-address remotehostname Remote Printing with the BSD Unix Print SpoolerIPaddress localhostname Do you wish to continue?System then prompts Would you like this to be the system default printer? y/n Connecting the Components Overview Altos System 5000 Ð Display Unit, Keyboard, and Mouse Ports System ConsoleAltos System 15000 Ð Display Unit, Keyboard, and Mouse Ports Altos 5000 Full-Feature Workstation ConfigurationConnecting the Components Local Area Network with Second Full-Feature Workstation Connecting the Second Full-Feature WorkstationNetwork Hub Unit Local Area Network with UIP Connecting the Third Full-Feature WorkstationLocal Area Network with Additional Full-Feature Workstations Connecting the Basic Configuration Altos 15000 Full-Feature Workstation ConfigurationConnecting Additional Full-Feature Workstations Cascading Network Hub Units Altos 15000 Cascaded Network Hub Units Cascaded Hub Cable Modifications End Connects To Basic-Feature Workstation10. Basic-Feature Workstation Configurations 11. Basic-Feature Workstation Configurations Connecting a Remote AT&T 6286 or Connecting a Local AT&T 6286 orNMS Printer Models Function PrintersDL3400/DL3600 Connecting a Local System PrinterConnecting an Alert Log Printer Connecting a Remote System PrinterDL5600 DX2300240 Connecting the Dedicated Automatic Trouble Report PrinterData Communications Equipment Connecting Modems and DSUs13. Daisy Chain Using a Hubbing Device14. Local Control Channel Connections Connecting LocallyMaterials Required 15. Remote Control Channel Connections Connecting RemotelyConnection Procedures Configuration Options Connecting Acculink Multiplexers16. Connections for 719 Networker to Host Processor 17. Connections for Two Local Acculink Multiplexers One Local Acculink Multiplexer and One 719 Networker 19. Connections for One Local Acculink Multiplexer Connection ProceduresConnecting the Current Version 719 Networker Connecting the Earlier Version 719 Networker External Systems Connecting the 719 Networker to the 74x Multiplexer20. External Systems Connections Connecting a Remote System Controller Connecting a Local System ControllerConnecting a Remote Dial Backup Control Unit Connecting a Local Dial Backup Control UnitConnecting a Remote Service Restoration Control Unit Connecting a Local Service Restoration Control UnitConnecting a Remote DCX Multiplexer Connecting a Local DCX MultiplexerConnecting a Computer System Requiring VT100 Emulation Connecting Remotely Netview/PC Connecting LocallyConnecting Remotely 22. ATR Connection Automatic Trouble Report FeatureAccumaster Integrator Connecting the Components 24. Accumaster Integrator Remote Connection Connecting the Components Analysis Network Management System Connecting the Analysis Connecting the Analysis 6510/560526. Analysis 6510/5605 and 5600 Remote Connection Connecting the Analysis 6510/5605 27. StarKeeper Connection StarKeeper Network Management SystemConnecting Remotely Bytex UMS Connecting the Host Processor to the Bytex UMSConnecting the UIP to the Bytex UMS Loading and Restoring Software Basic-Feature Workstation Software Full-Feature Workstation SoftwareMPX Multiprocessing Software UIP Application SoftwareOrder of Installation Basic Network Configuration Network Preinstallation PreparationCustomized Network Configuration Unix Software for the Host Processor Inserting the Software MediaSystem 5000 Boot Menu Installing Unix on Host Computer Press space bar to interrupt autobootInstallation Procedure Menu Installing Unix on Host Computer Hardware Configuration Menu Installing Unix on Host Computer New password Re-enter new passwordEnter your activation key or enter q to quit Init Single User Mode Enter the system node name or enter return to use unix Done reading tapeSelect top level of chain to Add or q to quit Adding altostcp aaa Enable aaa driverSelect next level of chain to Add or q to quit Add chain altostcp aaa y/nInstalling Altos TCP/IP over aaa DisabledOAddrRange Interface 6c80\N6caf Press Enter to continueEnter the netmask for this interface default Enter the internet address of this interfaceInternet Address Netmask Broadcast Address Do you want to relink the kernel now? Strike Enter when readySystem displays the following prompt Do you want the kernel environment rebuilt? y/n Type y Do you want this kernel to boot by default? y/n Type yPress Cntl-d Installing the MPX Software on the AltosEnter your Altos MPX activation key Enter your Altos MPX serial numberDo you wish to create a new kernel now y/n? Type y Press any key to continueRelease 4.2 NMS Software Installing the NMS SoftwareEtc/tz Installing NMS ReleaseType help85 Press Enter How many UIPs do you have 0, 1, or 2 Type n Type cd Press Enter Do you wish to have the screen-saver capability y/n nSafe to Power Off Press Any Key to Reboot 3rd hard disk is already installedFormatting the Third Hard Disk Do you want to install a 3rd hard disk? y/n/q Installing the 3rd hard disk. Please waitSoftware installation of the 3rd hard disk is complete Type root Initializing the NMS DatabaseOption Explanation NMS Parameters Menu Ð OptionsNnn.nnn.nnn.nnn uip-name Network Configuration of NMS HostNnn.nnn.nnn.nnn ffw-name Altostcp aaa Select a chain to remove Press Press EnterRemove altostcp aaa y/n System displays status messages and then request Do you want this kernel to boot by default? y/n? TCP/IP Configuration CompleteInstalling Token Ring Software on the NMS Host/UIP Products Currently Installed menu appears Type q Configuring the Token Ring Network on the 5000 Host/UIPAdd chain altostcp-pro0 y/n Type y Select top level of chain to Add or q to quit TypeSystem prompts for the card slot number If nn is 99, sufficient pseudo ttys are already configured Do you want to relink the kernel now? Type y Unix Software for the UIP System 5000 Boot Menu Installing Unix on UIPInstallation Procedure Menu Installing Unix on UIP Hardware Configuration Menu Installing Unix on UIP Press any key Strike enter when ready or Esc to stop Press Enter Add chain altostcp en0 y/n Interface Address Netmask Broadcast Address Press Return Is there an IPC1600 card installed in the system? y/nPress Ctrl-d UIP Software Type y or n as appropriate to your location Type Building NMS fonts What is the name of the NMS Host machine?Network Configuration of NMS UIP Do you want the kernel environment rebuilt? y/n appearsNnn.nnn.nnn.nnn host-name Type Remove altostcp en0 y/n Altostcp en0 Select a chain to removeType q Press Enter Configuring the Token Ring Network on the UIP Installing Token Ring Software on the UIPDo you want this kernel to boot by default? y/n Do you want to relink the kernel nowDEVICE=C\/DOS\/EMM386.EXE 2048 M4 Full-Feature Workstation SoftwareEtherLink II Configuration Installing MS-DOSStarLAN 10 NAU Configuration Token Ring ConfigurationEnter the floppy drive to use a Press Enter Enter the destination drive to use C Press EnterEnter the destination directory to use \/XONE Press Enter Do you wish to install the 100DPI fonts y/n? n Type y Do you wish to install the fonts y/n? n Type yDo you wish to install the OpenWindows fonts y/n? n Do you wish to install the DecWindows fonts y/n? nOne Setup Utility Press any key to continue Press Enter Ready to execute setup Press any key to continue Press EnterSelect Monitor Size Inch Other Enter selection of `q to Quit Insert the proper disk and Press Enter System responds Type Press Enter Enter I/O Address in hexEnter this systems IP address Enter a subnet mask255.0.0.0One Setup is now finished Press Enter Type edit XONE.CFG Type y Press Enter Do you wish to install the DecWindows fonts y/n? n Type Type appropriate number Enter a subnet mask System asks Files extracted Press any Key to continue One install complete Press any Key to continueType edit autoexec.bat Proteon LAN Support Setup \PROTEON Selection menu for board type appears LSP Software Setup Completed Press Enter to continue Network Configuration of Full-Feature Workstation Configuring Full-Feature Workstation with a Router Network Name=remoteportname gateway=1 name=localportname gateway=2 Nnn.nnn.nnn.nnn portnamePress Enter Otherwise, Press Enter Generic X-Terminal Basic-Feature Workstation SoftwareInstalling MS-DOS Installing NMW Software Installing Microsoft WindowsReturn to the root directory. To do this, Type cd \ Installation Installing the Analysis Gateway Option 5000 Systems OnlyPassword Type root Press EnterSystem prompts for the value of the starting I/O address Type D2000 Press Enter Type 2B0Do you want the kernel to boot by default? y/n Type y ConfigurationAnalysis Selection Menu How many local terminals 1 Ð 6 are configured on this 6510? Adding a 6510 to the 6800 Series NMSEnter Analysis 6510 name, 15 characters max To exit the configuration process, Type Changing 6510 Parameters Do you wish to see a system summary? y or nSystem Name CC Name Port # Enter Analysis 6510 name, 15 characters max ªsystem nameº Select port number from list 1,2,3,4,5,6,7,8Parameters successfully changed Removing a 6510 Configuration Setting Data Rates Elapsed TimeªSystem nameº removed from the system UIP Start-Up and Shutdown System Start-Up and ShutdownStarting Unix on the Host Starting the NMS Application ProgramType nms Press Enter Type ffw Press Enter Type admin Press Enter FFW Login WindowManager Window Shutting Down the NMS Application ProgramThey will be shut down? y/n n Shutting Down Unix on the Host Are you sure you want to shut down UNIX? y/nLog off now or risk your files being damaged Starting the UIP Application Program Starting Unix on the UIPTo select Return to Console Login Shutting Down the UIP Application ProgramPress Return to continue Press Enter Unix will now be shutdown? y/n Shutting Down Unix on the UIPPerforming Migration Introduction To Migrating Databases Databases Migrated Release 1 Database MigrationCleaning Up the Database Device AddressDevice Name Serial Number Device ModelCircuit Name Site NameSite Contact Phone Select All of the Above Databases. To do this, Type Backing Up the DatabaseMigrating the Database Do you wish to initialize the NMS database y/n n Do you wish to initialize the Online partition? y/n nOriginal Menu Showing Selected Type r1 Enter the previous NMS type sc, r1, r2, r3, r3.1, r4, r4.1Xxxx Data Base Initialization Completed Xxxx Data Base InitializationNow rebuild the NMS database indices To select Start the SystemStarting the AT&T Paradyne NMS system. Please wait Data Integrity Verification Checking the Migrated DatabaseCd /usr/tmp pg migrate.err pg migrate.out Profile Data Changes and CorrectionsPerforming Migration Release 2 Database Migration Cleaning Up the Database Database Backup for Migration Completed Continue with backup? y/n yMigrating the Database Enter the appropriate type, Type r2 Original Menu Showing Selected Type r2 Do you wish to migrate faults data y or n? nDo you wish to migrate trouble ticket data y or n? n Do you wish to migrate results queue y or n? nType c Press Enter Press nms Press Enter Checking the Migrated Database Release 3.0/3.1 Database Migration Cd /usr/tmp Pg migdbload.log pg migrestore.logTo migrate the NMS database, perform the following steps Do you wish to initialize the Online partition? y/n n Type Original Menu Showing Selected Type r3 Press Return to continue Press Return Do you have another level of tapes to restore? y/nType nms Press Enter Checking the Migrated Database Release 4.0/4.1 Database Migration Cd /usr/tmp pg initdb.log pg restorelogCleaning Up the Database Do you wish to initialize the Online partition? y/n n Do you wish to initialize the NMS database? y/n n Original Menu Showing Selected Type R4 Type n Press Enter Release 4.2 6800 NMS Main Menu appears. To continue Checking the Migrated Database Cd /usr/tmp pg initdb.log pg restorelog Running Diagnostics Boot Menu SDX Diagnostic ProgramDo you wish to review summary again y/n Type y SDX Main MenuStarLAN IRQ Strapping StarLAN 10 NAU Diagnostic ProgramIPC-900 Diagnostic Program for Altos 5000 Systems Only Insert new diskette for Drive a and strike enter when readyFormat complete, format another? After each line. When complete, Press F6 Press Enter Port-to-Port Connections Dip Switch Settings for Memory Address IPC-1600 Diagnostic ProgramType n Press Enter After each line. When complete, Press F6 Type DCPDIAG2 Emulex DCP/MUXi Diagnostic Program Type any key to proceed. Press Enter Select Start Address and Press EnterConfiguring 3810, 3811, and 3820 Modems 3810, 3811, and 3820 ModemsCEO Modem LCD prompts Save Straps? Yes Ð No Hardware Option Settings for the 2224-CEOSoftware Configuration Option Parameters for the 2224-CEO O12 Locking Option ChangesO34 O51Adapter and Cable Identification B Feature#Feature # System Printer For remote Bytex Switch ConnectsWorkstations For remote Analysis RemoteAnalysis For local DCX Multiplexers For localExternal Systems Remote Integrator/StarkeeperWorkstations Connects IBM NetView/PC ConnectsVT100 Emulation Connects 6821-F1-513 M6BC/M4BB StarKeeper Local System Controller LocalNetView/PC Connects Dataphone II Connects74x Multiplexers Connects Analysis Connects DCX Multiplexers ConnectsMaintaining Multiplexers C General Troubleshooting ProceduresCommand Port Failure Multiplexer ProblemsPollpf Multiplexer polling port is down Monitor Power Distribution Connection Figure C-3. Power Connections for 745 Multiplexers Figure C-4 Power Supply for 740 Multiplexers Figure C-5 Power Supply Connection for 745 Multiplexers NAP Speed Software Configuration Errors Faulty ConnectionsEvent Port Failure Evtpf Multiplexer event port is downNMS Commands External Systems Port Failure Event Log Printer Problems