Paradyne 6800 manual Ready to execute setup Press any key to continue Press Enter

Loading and Restoring Software

7.After some time marked by a line of dots on the screen, the system prompts:

Insert the X-ONE disk Labeled `Fonts Disk 2' Press ENTER to continue or `q' to Quit

Remove Fonts Disk 1, insert requested disk, and PRESS: Enter

8.After another period also marked by the line of dots on the screen, the following messages appear:

All files successfully installed

The following should be placed in your autoexec.bat file

SET XONEDIR=C:\/XONE

SET DOS4G=quiet

Would you like X-One to add this to your autoexec.bat file (y/n)? [y]:

PRESS: Enter

9.The system prompts:

Ready to execute setup Press any key to continue PRESS: Enter

10.The system prompts:

X-One Setup Utility Press any key to continue PRESS: Enter

11.The system prompts:

Select Mouse type

1.Mouse type device (pre-loaded driver)

2.Microsoft serial mouse

3.Logitech serial mouse

4.Mouse Systems serial mouse

Enter selection or `q' to Quit [1]:

TYPE: 1

PRESS: Enter

12.The system prompts:

Would you like to use the graphics board configuration detected by Xsetup (y/n)? [y]:

PRESS: Enter

6800-A2-GN22-30 January 1997 5-63