Paradyne 6800 manual Type edit autoexec.bat

Loading and Restoring Software

NOTE

For the 15000 platform, the division of full-feature workstations among the three processors should be:

Host Uip-1 Uip-2

7 3 14

Configurations with lower numbers of full-feature workstations should retain equivalent ratios among the processors for best performance.

4.If the workstation is connected to the NMS host processor and while still in the XONE directory:

TYPE: copy HOST.CFG XONE.CFG

PRESS: Enter

5.If the workstation is connected to an NMS UIP and while still in the XONE directory: TYPE: copy UIP.CFG XONE.CFG

PRESS: Enter

6.TYPE: edit XONE.CFG

PRESS: Enter

The DOS editor displays the XONE.CFG file. You should look for the line which starts with CONN_COMMAND and change WSNAME to the name of the workstation. Look for the line beginning with CONN_HOST and change NMSHOST to the name of the host machine if you are connected to the host or to the name of the UIP machine if you are connected to the UIP. Save the file and exit the editor.

7.If not installing the Token Ring package, do the following steps. If you are installing the Token Ring package, continue with the next section, Installing the Token Ring Software on the Full-Feature Workstation.

TYPE: cd . .

PRESS: Enter

TYPE: edit autoexec.bat

PRESS: Enter

The DOS editor displays the file. At the end of the file add the following line:

C:\XONE\PACKET\STARTPKT Save the file and exit the editor program.

8.Reboot the processor to ensure that all changed parameters are properly loaded.

6800-A2-GN22-30 January 1997 5-77