Paradyne 6800 manual DL3600 Ð Hardware Settings Correct Value

Preparing the Printers

4.Upon pressing the FF button, the first MENU1 setting will print along with its optional values. The default value will have a short line printed beneath the left-hand portion of the value. Press the MODE button to move the red cursor under the various values to be selected. Press the FF button to select the value to be used for that particular setting. The printer will underline that value and print the next setting and its values.

5.When ª< ==END== >º is printed, you are ready to exit from changing the MENU1 settings. Press the ONLINE button at this time to exit and return to the Function Menu.

6.When you have checked or changed all the MENU1 settings, select the HARDWRE function from the Function Menu by pressing the MODE button until the red cursor is positioned under the printed HARDWRE tag. Then select that function by pressing the FF button. Table 3-2 shows the settings and correct values for the HARDWRE function.

7.When ª< ==END== >º is printed, you are ready to exit from changing the HARDWRE settings. Press the ONLINE button at this time to exit and return to the Function Menu.

8.To exit SETUP mode, position the red cursor under SAVE&END and press the FF button.

Table 3-2

DL3600 Ð HARDWARE Settings

Setting

Correct Value

<PPR-OUT>

DETECT

<PRT-DIR>

BI-DIR

<BUZZER>

ON

<WORD-LG>

8 BIT

<BUFFER>

8KBYTE

<FEEDER>

REAR

6800-A2-GN22-30 January 1997 3-11