Paradyne 6800 manual Done reading tape, Enter the system node name or enter return to use unix

COMSPHERE 6800 Series Network Management System

The system prompts for the tape and floppy and asks:

Strike ENTER when ready or ESC to stop

PRESS: Enter

15.After the disk and tape are read, the following message appears:

Done reading tape...

16.The system continues:

TCP/IP Runtime Serialization

Enter your serial number or enter q to quit:

CAUTION

The serial number and activation key entered must be unique across all TCP/IP nodes on the network to which the host is connected. The TCP/IP daemon will shut down for both nodes having equal serial number or activation keys.

TYPE: serial number from distribution package

PRESS: Enter

The system prompts:

Enter your activation key or enter q to quit

TYPE: activation key

PRESS: Enter

Several status messages appear and the system then prompts:

Enter the system node name or enter return to use [unix]:

NOTE

If you plan to use the default network configuration, you must enter unix as the system node name and 1.1.1.1 as the internet address.

PRESS: Enter

to accept the default node name, or

TYPE: system node name

PRESS: Enter

The following messages appear:

TCP/IP Configuration Complete.

Altos TCP/IP Runtime installation complete.

The system displays the currently configured chains and then the following menu:

5-12 January 1997 6800-A2-GN22-30