Paradyne 6800 manual Basic-Feature Workstation Configurations

COMSPHERE 6800 Series Network Management System

Figure 4-11. Basic-Feature Workstation Configurations

The following sections explain how to make the connections shown in Figure 4-11.

Connecting a Local Altos 486DX/33, an Altos SX/20, or an AT&T 6386 SX/EL

To connect an Altos 486DX/33, an Altos SX/20, or an AT&T 6386 SX/EL as a local basic-feature workstation, perform the following steps:

1.Connect the grounded end of the 035-0153-0031 cable to one of the following ports on either the host processor or the UIP:

±COM1/COM2 port: use the 002-0054-0031 connector

±IPC-1600: connect directly to port

2.Connect the other end of the 035-0153-0031 cable to the 002-0047-0031 connector.

3.Connect the 002-0047-0031 connector to the 9-pin serial connector on the basic feature workstation.

4-16 January 1997 6800-A2-GN22-30