Paradyne 6800 manual Enter the internet address of this interface

Loading and Restoring Software

The following messages appear:

Adding altos_tcp -> en0

Enable en0 driver

Installing ALTOS TCP/IP over en0

Please enter the following information in order to configure en0

The system prompts:

Enter the internet address of this interface

TYPE: internet address

in the form nnn.nnn.nnn.nnn

Where: nnn is an integer from 1 to 255

PRESS: Enter

The system prompts:

Enter the netmask for this interface (default: 255.255.0.0):

NOTE

Consult your System Administrator to determine whether to specify a net mask, a broadcast address, or DOMAIN name different from the default. Choose the default when using the basic network configuration as described in the Network Pre-Installation Preparation section.

PRESS: Enter

The system prompts:

Does the interface use a broadcast address of all 1's? (y/n) (default:y):

PRESS: Enter

The system prompts:

Enter the broadcast address for this interface (default: nnn.nnn.255.255):

NOTE

The displayed default shows the first two levels of the IP address you have just entered. The default above for broadcast address assumes the use of the basic network configuration parameters.

PRESS: Enter

The system asks for verification of the previously entered values:

Interface Address:

Netmask:

Broadcast Address:

6800-A2-GN22-30 January 1997 5-47