Paradyne 6800 manual LSP Software Setup Completed Press Enter to continue, Type

Loading and Restoring Software

If they are not correct, press Esc; the system requests entry again, starting with Step 12. If the values entered are correct,

PRESS: Enter

18.The system displays statements for the CONFIG.SYS file. The statements appear as follows:

device=C:\PROTEON\proarb.sys device=C:\PROTEON\pro16eul.sys /B 0a20 /I 5 /D 5 /S nn

The above file C:\PROTEON\CONFIG.LSP has been created for your convenience and future reference. It contains the necessary config.sys statements to run the LSP software.

Press ENTER to continue; ESCAPE to change previous selections Where: nn is the selected transmission speed, 4 Mbps or 16 Mbps To accept them,

PRESS: Enter

19.The system prompts:

Select action of LSP statements Add to your config.sys

No action

Replace your config.sys

Use the ↓↑ keys to select Add to your config.sys and PRESS: Enter

20.The system displays the following confirmation.

LSP Software Setup Completed Press ENTER to continue . . .

PRESS: Enter

21.The Installation Function Selection Menu appears as in Step 4. To exit the install procedure,

TYPE: x

22.The system prompts:

Are you sure you want to exit the Installation Program? TYPE: y

The DOS prompt appears.

23.Insert the floppy disk labeled ªToken Ring FFW Applicationº in the floppy disk drive and TYPE: a:install

PRESS: Enter

24.The following installation instructions appear on the screen.

6800-A2-GN22-30 January 1997 5-81