Paradyne 6800 manual Enter the floppy drive to use a Press Enter

Loading and Restoring Software

2.The Welcome screen appears. PRESS: Enter

3.The screen displays the default settings for Date/Time, Country, Keyboard and Install to Hard Disk. Change the defaults, if necessary.

PRESS: Enter

4.The screen displays two setup options (Install to C:\DOS and Run Shell on start up ± Yes). Change the second option so that the shell will not run at start-up. Follow the instructions displayed on the screen.

PRESS: Enter

5.A new screen displays a graph indicating the percentage of information transferred from the floppy disk to the hard disk.

When prompted remove Disk 1 and insert Disk 2. PRESS: Enter

6.When prompted, remove Disk 2 and insert Disk 3. PRESS: Enter

7.When prompted, remove Disk 3. PRESS: Enter

The system reboots; MS-DOS 5.0 is installed and running.

Installing the GrafPoint X-One Software Package with EtherLink II Card

To install the GrafPoint X-One Server program and associated software, perform the following steps:

1.Insert the GrafPoint X-One Installation disk into the drive and TYPE: A:install

PRESS: Enter

2.The system prompts:

Enter the floppy drive to use [A:]: PRESS: Enter

3.The system prompts:

Enter the destination drive to use [C:]: PRESS: Enter

4.The system prompts:

Enter the destination directory to use [\/XONE]: PRESS: Enter

6800-A2-GN22-30 January 1997 5-61