Paradyne 6800 manual Enter Analysis 6510 name, 15 characters max ªsystem nameº

COMSPHERE 6800 Series Network Management System

2.The system displays the following message:

Please select the 6510.

1.ªSystem nameº

2.Cancel operation

Enter a number from 1 to 7 depending on the number of 6510's configured already.

TYPE: number of the system to be changed

PRESS: Enter

3.The system prompts you to change the ANALYSIS name, port number, and the number of local terminals on the ANALYSIS NMS. The current parameters display in brackets ([]). The following message appears:

Enter Analysis 6510 name, 15 characters max [ªsystem nameº]...

TYPE: the new system name

PRESS: Enter

Select port number from list [[1],2,3,4,5,6,7,8]...

TYPE: the new port number

PRESS: Enter

How many local terminals (1 Ð 6) are configured on this 6510 [ªvalueº]?...

TYPE: the new number of local terminals

PRESS: Enter

4.The system displays the information entered in Step 3 and prompts you for confirmation.

You have entered the following information:

ANALYSIS 6510 name = ªnameº Port Number = ªvalueº

Number of local terminals = ªvalueº

Is the information correct [y or n, q to quit]?...

TYPE: y (or n if the information is not correct)

PRESS: Enter

If you enter n (no), the three prompts shown in Step 3 are displayed again enabling you to enter information. If you enter y (yes), the following message appears.

parameters successfully changed

5.The ANALYSIS Selection menu appears. For additional changes, return to Step 1. To exit the procedure,

TYPE: 4

PRESS: Enter

5-98 January 1997 6800-A2-GN22-30