Paradyne 6800 manual NMS Commands

COMSPHERE 6800 Series Network Management Systems

		Table C-1
	NMS Commands
Command	Name		Function
dsdp	Display Device Profile		Use this command to check the System Polling field.
			It must be set to mux poll to permit the multiplexer to
			be monitored for alerts and events.
eddp	Edit Device Profile		Use this command to set the System polling field to
			mux poll.
dsams	Edit Alert Monitoring State		Use this command to check the Polling state field. It
			must be set to polling, polling and asynch report-
			ing, or asynch polling for control channel m2 to
			detect faults associated with the multiplexer.
edams	Display Processing Filter		Use this command to set the Polling state field to
			polling, polling and asynch reporting, or asynch
			polling on for control channel m2.
dspf	Display Alert Monitoring State		Use this command to display the processing filter
			value for each alert group of the device type specified.
edpf	Edit Processing Filter		Use this command to change the value of the filters
			that define an active alert.
dsdf	Display Display Filter		Use this command to display the display filter value
			for each alert group of the device type specified.
eddf	Edit Display Filter		Use this command to change the value of the filters
			that define the alerts that will display on the network
			map, network monitor, and network summary.

You should also check the Edit User Selection Criteria (edusc) command to see if the alerts you are interested in are configured for display on your individual monitor.

If you have verified that all connections and software configuration entries are correct, and that the multiplexer hardware is functioning, you should check the host processor for failure.

C-10 January 1997 6800-A2-GN22-30