Media Card Slots

MediaCommand™ and Media Card Playback

Warning: Some media cards available on the market are not properly certified to follow the card type specifications noted below and cannot be used by the Card Reader. If you experience problems with the reading of your file, please transfer your files to a properly certified card.

Inserting a media card

1.Insert a card into a matching card slot on the front of the TV. Be sure to use the correct card slot. Card 1 will accept MultiMediaCard™ and SD Media Card. Card 2 will accept SmartMedia™. Card 3 will accept CompactFlash®. Card 4 will accept MEMORY STICK™. Cards up to 128mb, with a file format of FAT 16 (block size = 1024 or 2048) are supported.

Normally the label side should be up, but if the card does not fit, try turning the card over and insert again. When properly inserted, the light next to the slot will light up.

2.Press DEVICE on the remote control to display the Device Selection Menu and then select the correct card slot from the list, using ADJUST , , or .

3.The Media Dialog box (figure 17) will automatically display. Use the AUDIO button to switch from JPEG Picture Slideshow setup to MP3 or WMA7 Audio Playlist setup or use the VIDEO button on the remote to switch from the MP3 or WMA Audio Playlist setup to JPEG Picture Slideshow setup.

Don’t pull the media card out while it is playing.

��

Figure 17. Media Dialog Box

4. On the remote control, press:

PLAY: to start the slideshow or play audio.

GUIDE: to display the JPEG Thumbnail menu (Figure 18) or Audio track playlist (Figure 19)

DEVICE

MENU: to display the Media Setup menu (Figure 20).

Remote Control Buttons for Controlling the Playback

For JPEG Pictures Slideshow:

PLAY:	begins or resumes slideshow playback
PAUSE:	pauses or resumes playback while in the
	automatic advance mode.

FF:skips to the next slide.

REW:	returns to the previous slide.
FORMAT:	single press rotates the slide 90˚. Multiple
	press continues to rotate the slide.
STOP:	Stop slideshow, return to media card
	screen.

For MP3 or WMA Audio Playback

PLAY: begins or resumes playlist playback.

PAUSE: pauses or resumes playback.

FF:skips to the next track/song.

REW:	skips to the previous track/song.
STOP:	Stop playback and returns to media card
	screen.

Using the Picture Thumbnail Menu or Audio Playlist Menu

For JPEG Picture Thumbnail Menu:

Figure 18

1.Press GUIDE on the remote to display the JPEG picture Thumbnail menu.

2.Press ADJUST , , or to move the highlight to different images (CH up/down will change pages of the Thumbnail menu). Use REW to go to the first slide and FF to go to the last slide on the page.