Mitsubishi Electronics WD-52825, WD-62825 manual 100, Replacing the Lamp Cartridge

Appendix H: Lamp Cartridge Replacement, continued

Replacing the Lamp Cartridge

Tool needed: Phillips screwdriver

1.Turn the television off and unplug the AC cord.

2.Open the front panel by pressing in the center of the glossy panel, above the diamond. The panel will lower and you can access the lamp cartridge.

3.Using a phillips screwdriver, remove the three screws (one on the left and two on the right side) that hold the recessed plastic cover in place.

4.Remove the plastic cover and set aside with the screws.

5.After removing the cover, you will be able to see the lamp cartridge. With the screwdriver, loosen the three screws of the cartridge.

The three screws will not completely remove .

6.Gently grasp the metal handle and pull straight out (towards you).

7.Insert the new lamp cartridge securely

into the TV. Do not touch the glass surface of the cartridge.

8.With the screwdriver, tighten the screws on the lamp cartridge.

9.Replace the plastic cover and screws.

10.Close the front panel by pushing it back into place.

2.

3.

4.

handle

5. screws

6.

To order a replacement lamp cartridge, part number 915P020010, call (800) 553-7278.

100