Mitsubishi Electronics WD-62825, WD-52825 manual Connecting a DTV Receiver with RGB, HV Video

Connecting a DTV Receiver with RGB, HV Video

DTV Receiver with RGB, HV Video

Figure 13

A coaxial splitter, RGB, HV and audio cables are required. These are not included with the TV.

1.Connect the outside antenna, cable or satellite to ANT or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions and cable compatibility).

2.Connect the incoming terrestrial antenna or cable (not satellite) to ANT-1 on the TV back panel

(a coaxial splitter, available at most electronic supply stores, may be required to complete this installation).

3.Connect RGB cables from the DTV receiver to Input- DTV on the TV back panel.

DTV Receiver to TV Back Panel

•G (green) to Y/G

•R (red) to Pr/R

•B (blue) to Pb/B

4.Connect the H & V sync signals as shown below:

		�� ���� �����
��						AUDIO
					R	L(MONO)
��������
�������		DTV/
�� �����
		CABLE/
		VHF/
		UHF
		ANT-1							��
		MAIN
��
									INPUT-DTV
									YPbPr / RGB HV
									(480i/480p/720p/1080i)
					��	�	Pr/R	Pb/B	Y/G
						�	V	H
					�	�
					�	�
					�	�
									��
��
									��� ��������
									����� ��� ������������
				��	�����	�����				�������
										���� �� ���������
�	�	�				�				�� ��� ����������
							���
						�	�������		��� �� ��
				���					�� �
									�� �
	�	�							�������
					��				����� ���
����� ����			��	������			�������		�� ���� ���	��������� ��
										��
									��
									�� ��������
									����� �� ���������
									��

•	H (horizontal sync) to H	Figure 13. Connecting an External DTV Receiver with
•	V (vertical sync) to V	RGB Video Connections

All 5 cables (G,R,B,H and V) must be connected. 3 cables or Sync on green connections are incomplete or not compatible and will not work.

5.Connect the L (left) and R (right) audio cables from the DTV Receiver to Input-DTV AUDIO on the TV back panel.

It may be necessary to obtain a VGA to RGB, HV adaptor cable. These are available at most computer stores and many electronic stores. Some of the adaptor cables have RCA type connector ends, others have BNC type ends and will require adaptors as shown on page 26.

IMPORTANT

See Appendix B for RGB, HV video signal compatibility information.

For digital audio connections, see your DTV Receiver and A/V receiver Owner’s Guides.

27