Paradyne 6800 manual Shutting Down Unix on the UIP, Unix will now be shutdown? y/n

COMSPHERE 6800 Series Network Management System

3.The system will prompt you to continue.

Press RETURN to continue PRESS: Enter

4.The Network Management System Menu displays. At this point the UIP application program has been stopped but the UNIX operating system continues to run.

Shutting Down UNIX on the UIP

Once the UIP application program has been shut down, you can shut down UNIX and power down the entire system. To do so, perform the following steps:

1.The Network Management System Menu displays. Select Shutdown UNIX: TYPE: 3

PRESS: Enter

The following message displays:

UNIX will now be shutdown? (y/n):

2.To proceed with the shutdown, TYPE: y

PRESS: Enter

3.The system displays the following message:

You may turn the power off once UNIX has been shutdown.

Do not shut off the power until the message shown in Step 4 displays, indicating that it is safe to power off.

4.The system displays the following message:

Shutdown started (date/time)

Broadcast message from root (console) on uip-1 (date/time)

THE SYSTEM IS BEING SHUT DOWN!!! Log off now or risk your files being damaged.

NOTE

This message is broadcast across the system to alert other users of impending shutdown.

5.When the following message displays, either power down the system or press any key to reset the system.

Safe to Power Off

- or

Press Any Key to Reboot.

6-10 January 1997 6800-A2-GN22-30