Paradyne 6800 manual Cd /usr/tmp pg initdb.log pg restorelog

Performing Migration

12.The Edit Profile commands, Edit Site Profile (edsp), Edit Device Profile (eddp), Edit Facility Profile (edfp), and the Identity (id) command provide mechanisms for changing or correcting the migrated data. When migration completes successfully, the messages sent to the console can be reviewed to take note of any warning messages as follows:

cd /usr/tmp pg initdb.log pg restorelog

Upon completion of the migration script, perform the following:

•Shutdown the NMS and restart it.

•Turn polling on again with the edams command.

•If your NMS has ANALYSIS systems connected and you wish to change or add systems, perform the configuration steps now as specified in the Configuration section.

•Backup the 4.2 database onto new cartridge tapes.

6800-A2-GN22-30 January 1997 7-41