Paradyne 6800 manual Installing the MPX Software on the Altos, Press Cntl-d

Loading and Restoring Software

The system prompts:

INIT: Single User Mode

Type CONTROL-d to proceed with normal startup, (or give root passwrd for system maintenance)

PRESS: Cntl-d

When the login prompt appears, the procedure on the Altos 5000 is complete.

b.For an Altos 15000 system, enter the following command to reboot in single user mode:

TYPE: shutdown -g0 -y -i1

PRESS: Enter

The system prompts:

INIT: New run level: S

INIT: Single User Mode

Type CONTROL-d to proceed with normal startup, (or give root passwrd for system maintenance)

PRESS: Cntl-d

When the login prompt appears, the procedure on the Altos 15000 is complete.

Installing the MPX Software on the Altos 15000

This section describes how to install the Altos MPX Multiprocessing software on the Altos System 15000 host processor. Skip this section if you are installing on an Altos 5000.

To install the MPX software, perform the following steps:

1.At the system prompt, TYPE: cd /usr/MPX PRESS: Enter TYPE: ./installMPX PRESS: Enter

2.Use the ↓↑ keys to highlight Install and PRESS: Enter

3.Use the ↓↑ keys to highlight A New Product and PRESS: Enter

4.The system prompts you whether to install all or part of the software. Use the ↓↑ keys to highlight Entire Product and

PRESS: Enter

6800-A2-GN22-30 January 1997 5-19